John Bell
  • Male
  • Port Elgin, Ontario
  • Canada
Share on Facebook
Share
  • Blog Posts
  • Discussions (142)
  • Events
  • Groups
  • Photos
  • Photo Albums
  • Videos

John Bell's Friends

  • Carl Orton
  • Rob A
  • Fred Williams
  • Steven M Bray
  • Michael W Mallock
  • Mark Pensenstadler
  • Doug Malloy
  • Wayne Brazinski
  • Greg Wood
  • Tom Sullivan
  • Gregory  Sawka
  • David Mason
  • Don Morrisey
  • John Heather
  • David J. Beaulieu

John Bell's Discussions

Battery capacitor and OV protection

Started this discussion. Last reply by John Bell Aug 30. 13 Replies

Anybody install the optional 68k capacitor on the battery? Also, the UL manual says that extra protection circuits are not to be installed on the alternator but some have installed over voltage…Continue

ELT mounting

Started this discussion. Last reply by John Bell Mar 30, 2018. 2 Replies

I have the ACK E-04 ELT and am mounting it in the same position as a few of the Cruzer forum guys (beside the belly hatch) but have a question as to the mount angle. The instructions say that the…Continue

UL350 instrumentation options

Started this discussion. Last reply by Larry Ward Mar 28, 2018. 4 Replies

Just wondering what avionics/instrumentation packages people are looking at matching up to their 350.I've been poking around at Dynon and GRT. GRT seems to have some reasonable pricing for complete…Continue

Header tank or not

Started this discussion. Last reply by Joe Hopwood Jun 3. 61 Replies

Installing a UL350is in a Cruzer and am pondering a header tank. There seems to be a lot of good reasons to have one a only a few not to. The possibility of voiding a fuel line during uncoordinated…Continue

 

John Bell's Page

Latest Activity

John Bell posted a discussion

Battery capacitor and OV protection

Anybody install the optional 68k capacitor on the battery? Also, the UL manual says that extra protection circuits are not to be installed on the alternator but some have installed over voltage protection relay circuits. Can others enlighten me?See More
Aug 29

Profile Information

Aircraft Model
CH 750 Cruzer
Project Status
Just started
Building From
Partial kit
Engine installed (or plan to install)
UL Power
Building Experience
Have already built an airplane
Flying Experience
Sport Pilot (or Ultralight)

Comment Wall (6 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 8:53am on November 26, 2018, Fred Williams said…

I did order mine for Aircraft spruce.   I ended  up needing some 90 deg ports off the top and was able to order them directly from Andair.  Surprisingly,  I received them in about a week.   I have heard that they have less than good response times.   They proved me wrong.  It is a well built valve.   I had one in the RV 10 that I built before the cruzer.  

Dr Fred

At 6:11pm on March 25, 2017, Ron D Leclerc said…

Also John  I'm using a 2300 VW/Porsche Engine(direct drive)... I'm not building a standard pulley, I'm using the flywheel end(the proper end)!!!   These engines are use in Europe and one company has a certified design!   The Porsche engine was used in the Moony's year ago!

Ron

At 6:03pm on March 25, 2017, Ron D Leclerc said…

Hey John

I don't think or remember what the ohm readings on the iss senders???  I did use the IIC senders as well as the gauges.   I purchased my senders from Van/s and my gages from ACS.  Vans use the same gauges but they have them branded with the Van's name on them!!!!  ACS is the best place to buy the IIC gauges and senders from.  As long as you use the same senders as the gauges it did not matter!!!!

Hope that helps... I have switched over to building the 750 Cruzer now as it came out just as I was finished redesigning all of the mods that the CruZer came out with!

Ron

At 7:59am on December 5, 2016, Ron Lalonde said…

The UL engine is awesome. A friend of mine has one in his 701.

I have a 601HDS with a Rotax 912, which is a great engine.....but if I had to change out in the future I would certainly think about the UL as a replacement.

Ron

At 12:10pm on October 4, 2015, Gregory Sawka said…

Hi John. I have a cruzer build in progress in Calgary. Fuselage 80% done. One wing 90%. Tail group in progress. Ordering Fw forward next week for an O200 continental.

Greg Sawka

At 11:38am on January 4, 2015, Mark Maltais said…

Hi John!  I'm in Thunder Bay.  :)

 
 
 

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

Transition Training:

Pro Builder Assistance
 

Pro Builder Assistance

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service