Online Community of Zenith Builders and Flyers
Zenith Aircraft now supplies its proprietary rivets and riveting system through Aircraft Spruce and Specialty:
The 1/8-inch (A4) and 5/32-inch (A5) blind rivets are available through Aircraft Spruce in batches of 100 each. The riveter tools, supplied…Continue
Added by Zenith.Aero on September 12, 2014 at 4:00pm — No Comments
Following is a brief preview of our planned activities for the upcoming Open Hangar Day and Builder Fly-In Gathering on September 19 & 20, 2014 at the Zenith Aircraft factory in Mexico, Missouri. View the Event Page for "official" details and to…Continue
We had a great time at our 7th annual "Fly In to Summer" Open House and Zenith Builder Fly-In Gathering at the factory in Mexico, Missouri. Following are photos of the day's events.
Below, the Zenith CH 750 Cruzer, with a couple CH 601 XL arrivals in the background:…Continue
U.S. Senate Introduces GA Pilot Protection Act, Companion to House Bill
EAA - March 11, 2014 - Three U.S. senators Tuesday introduced the General Aviation Pilot Protection Act as a companion bill to one unveiled in the House of Representatives in December, which includes a provision…Continue
One of North America's leading manufacturers of recreational aircraft kits is turning 40 this year. Zenair Limited was founded by…Continue
You're invited to join us for our "Fly In To Summer" Builder Fly-In Gathering at the Zenith Aircraft Factory.…Continue
Added by Zenith.Aero on February 11, 2014 at 4:00pm — No Comments
Added by Zenith.Aero on November 22, 2013 at 3:14pm — No Comments
We often see "off-road" (or "off-airport") photos of the STOL CH 701, so here we share a few "on-road" photos:
Here on short final:
We're nearly ready for our next big adventure at "AirVenture! We hope you can join us!
Here is a summary of some of the planned Zenith activities.
Zenith Aircraft Co. will host its second “Engine Day” at the company’s exhibit at AirVenture in Oshkosh on Thursday, August 1 from 10 am to 2 pm. The company will have a number of Zenith aircraft with different installed engines on display, as well as representatives from a number of engine manufacturers.
In 2012, Zenith hosted its first “Engine Day” at Oshkosh, with a handful of different powerplants and their representatives on hand. “We didn’t know what the response would be,” said…Continue
Added by Zenith.Aero on July 18, 2013 at 11:00am — No Comments
Here's a screen shot of the Zenith CH 750 Cruzer cabin as seen in QuickTime VR.
Download the high resolution Quicktime VR panoramic file to tour the Zenith CH 750 cabin in…Continue
Added by Zenith.Aero on July 1, 2013 at 6:09pm — No Comments
The following was the lead story on AOPA's AVIATION eBRIEF (February 5, 2013)Continue
The following was first published on General Aviation News on July 18, 2012
Zenith Aircraft Co. will host its first-ever “Engine Day” next Thursday, July 26, at the company’s exhibit at AirVenture in Oshkosh. The company will have a number of Zenith aircraft with different powerplants on display, as well as representatives from a…Continue
The following was published by GeneralAviationNews.com on July 9, 2012, by Janice WoodContinue
The following article was published a few years ago in Kitplanes magazine. While all of us may not agree with all of the author's observations, it's shared here to help Zenith builders, owners and pilots increase their awareness of safety issues in operating their homebuilt kit plane. We invite you to share your comments below.
The following is from November 2011 issue of Experimenter, EAA's Homebuilder e-Newsletter:
EAA Experimenter is about you, the homebuilder. Whether you are building or flying an experimental aircraft, we need your story! If you don't think you have a…
Added by Zenith.Aero on November 15, 2011 at 4:30pm — No Comments
(Older posts for the Zeniths to Oshkosh planning by Joe Scheibinger)
It's already July and we're just weeks from the start of AirVenture (Oshkosh)!Continue
Added by Zenith.Aero on July 1, 2011 at 8:00am — No Comments