Online Community of Zenith Builders and Flyers
Posted on March 26, 2019 at 5:24pm 2 Comments 0 Likes
How much friction / how free should the main flap control tube be on a 750 when fitted I don’t want to rivet it just in case. I can turn it by hand without much effort but is not free like in a normal baring. thanks
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.
Custom Upholstery Kits for your Zenith Aircraft:
Zenith Vinyl Upholstery Kits
Zenith Apparel from EAA:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
Pro Builder Assistance
Pro Builder Assistance
Aircraft Spruce & Specialty for all your building and pilot supplies!
© 2019 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).
Comment Wall (4 comments)
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers
Darren,
You need to consider another engine for your cruzer. The carbureted Rotax 912 carbureted engine will make it terribly underpowered. Very difficult to synchronize the carburetors and keep them that way. Have a friend that has that engine in a 701. Does not like it and is always fiddling with it. Also very complex to install. Lots of hoses and connections
You need more power for the 750 cruzer. 130 hp will make it perform nicely.
Have you considered the Viking aircraft 130 engine (vikingaircraftengines.com). Produces excellent torque which translates to outstanding thrust. That is what I am putting in my cruzer.
If building in stages, start with the tail to get used to the process, then wings, and finally the fuselage.
Larry Sward
N750LK
Darren,
i am working on 750 Cruzer purchased it all at once, but I think build order for storage and skills is rudder to learn, right wing, flapperons horizontal stabilizer and elevator, left wing, rear fuselage, front fuselage, join fueselage, gear, motor mount, motor panel, install tail, install wings, final bits and panel.
The order optimizes space since wings are earsier to store than the fuselage. The other issue is the wing can get monotonous. So doing the tail and control surfaces in between gives you a break. To optimize purchasing, you might do the wings together. Just my 2 cents worth . Some people like to get the fuselage done first to work on engine and panel in between working on wing, since there are lots of planning and wall time waiting for stuff, but you need the space to build that much at once.
Terrencehallo@hotmail.com
I am not just finishing a Cruzer over 2 yrs from kit.
No major headaches but send me your email and we can discuss minutiae together rather than online.
Dr. Terry Hall