Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
DRILLING JIG FOR REMOVING AD5/AD6 SOLID RIVETS
Comment
-
Comment by Greg P Couttie on December 3, 2009 at 11:32am
-
The tool is 60mm across , with 40mm pitch rivets you have a around 70mm to fit the tool
between,this takes into account the radius of the neighboring rivet heads .
-
Comment by Roger Lambert on December 2, 2009 at 3:30pm
-
It appears you may be clamping the legs of the jig on top of other rivet heads nearby unless the spacing of the rivets is more than the width of the tool. Otherwise, it looks nicely done.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers