Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
750 Armrest not wantin to fit...
I finally figured out the rear gear channel goes on the outside of the belly skin and the front goes inside the belly skin. Now it seems to fit much better but it took a while to see where I messed up. So far every time something did not fir properly, it turned out to by my fault. My 750 has not had any fitment issues yet.
Comment
-
Comment by Ghazan Haider on November 9, 2017 at 12:17pm
-
Thanks for this. I'm having the same issue and just cannot find a drawing that clearly shows where the flanges go. I was wondering if its just the corner gussets at the rear side that should go above the flange. It makes sense for the flange to go over the rear skin so air 'does not catch'
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers