I was looking at a few of the pictures from the latest fly-in out west. I saw a Zodiac that looked particularly good. It led me to deciding to polish-finish my Zodiac instead of painting. Problem is, I don't know where to start. Any one with experience on packages, where to get them, technique, etc??

Views: 1877

▶ Reply to This

Replies to This Discussion

So i went with the rolite and started with an oribtal polisher i got at my local hardware store for 30 bucks. After an hour and half i'm starting to think i didnt get one robust enough. What did yall use? Where from?

I guess if i add to much pressure the orbiter just stops rotating and vibrates. I dont mind the vibration if only i felt like it meant i was making progress. Thoughts?

Being the lazy sort who does not like to do things over, it raises the question:

If I do a nice mirror polish, can I overcoat the polished surface with a clear sealer to keep it that way?  I am thinking of things like automotive clear coat.  Anyone over done this or similar?

I'm using Nuvite to polish my plane. You can look for me on this site and see a posting of the first piece that I polished. It was the top nose fuse skin. Several builders has used Nuvite. Scott Laughlin being one. He has a nice website (http://www.cooknwithgas.com). He has several photos of the polishing process.

I'll attempt to upload the pdf off the Nuvite site that details a process for their polishing system.

Hope this helps
Jerry
Attachments:
I'll also try to upload a pdf off the Sonex site that details the polishing process for Nuvite
Attachments:
Great information guys. I have a question that I have been too lazy to look up or try out different solutions for. I like to make a lot of notes on the skin with a sharpie, as simple reminders (like "Forward" "Top" "L"/"R" centerline marks etc). Whats the best way to get that off, just polishing? Also the skin on my horizontal stab came from Zenith with the "6061T6" markings on the outside. Same solution?

I used the Polish that is rolled up in a can like a cinnamon roll. Pinch a small amount of and rub. It takes all markings off very easily.

I used denatured alcohol to remove both. Got it in the aviation department of Home
Depot.
Jerry
Heh heh heh... like it.
I did the same thing! Works like a charm!

RSS

New from Zenith:

Zenith Planes & Parts For Sale 
 

Classified listings for buying or selling Zenith builds and parts...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

Transition training:

Flying Knuckleheads

Lavion Aero

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2026   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service