Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Bradford Drown's Blog – January 2020 Archive (1)
Center Wing, time to debur
Top skins and nose skin is in place drilled to A5 with strips and plates in place as well as L angles rear of strips and connecting I/b gear box rib and adj. nose ribs. (I should shim these where they attach to the skins?) I cut out excess nose skin, will trim at some point in the future. Getting ready to tear down and debur. I am now struggling with the…
Added by Bradford Drown on January 5, 2020 at 7:34pm — No Comments
Latest Blog Posts
Most Popular Blog Posts
- Hi guys, Completed the Rudder on Saturday, June 22nd. A good learning experience. I had to remove my first bad rivet due to a gap at the head. Sweated that out since it was one of the last rivets…
- Elevator trim tab horn issue
- Center Wing spar issue with rear ribs
- Error repaired
- Rear Fuselage and Rudder Hinges
- Seat Panel
- Center Wing, time to debur
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
