All Blog Posts (2,099)

First engine run

Added by Jim and Amelia Isaacs on May 5, 2019 at 6:33pm — 2 Comments

Awesome Cross Country in my 601XL

Flew my 601XL to Florida and back last week. What a great trip! The 601 and Corvair performed flawlessly. You can checkout the adventure on my blog: 2002 Mile Florida…

Continue

Added by Ken Pavlou on May 5, 2019 at 10:12am — 7 Comments

Another failed nose-gear bungee on my 701

Funny thing – the original bungee on my 701 lasted for years. But with about 5 years and 200 hours on the aircraft, I was persuaded to replace it. So, I ordered one from Zenith, also the bungee replacement tool which helped - only to find the bungee was too big for my plane. It was really loose and with the gear off the ground, I could push the bungee off the pegs on the nose gear leg.

 

A quick call to Zenith, and Roger kindly digs up a smaller one and sends it to me. It fits…

Continue

Added by Sebastian Dewhurst on April 29, 2019 at 1:30pm — 4 Comments

Trust your engine

First time poster, had a long road to airworthiness. Just wanted to let those of you with corvair engines know that the engine is very very hearty. This picture is from the first flight after I purchased the aircraft. The 2700 CC engine was overheated to the point where it melted the heads and gaskets. It landed pouring oil and smoking like a chimney. Running way too lean. It landed running though. Even with what is shown, the engine was chugging along. Now I have solved the issue, rebuilt…

Continue

Added by Kamin Royal Gilson on April 24, 2019 at 11:32pm — 3 Comments

need wing fold conversion

Hey fellow Zenith builders: I am selling my CH701 and a potential buyer from out of state needs the plane modified to the wing fold option.  I do not have the facilities nor time any more to accomplish the work.  Would appreciate any info on where I can get this job done, preferably close to Oklahoma.  Don Herbel, Collinsville, Okla.

Added by Donald R Herbel on April 24, 2019 at 10:52am — No Comments

Sun 'n Fun Fly-In 2019 and 2,000 miles of flying

Here's my report of the 2019 Sun 'n Fun fly-in earlier this month (April 2 -  7) in Lakeland, Florida, with photos and videos of the trip to and from Lakeland from the…

Continue

Added by Sebastien Heintz on April 17, 2019 at 10:00pm — 5 Comments

Nearly done!

Added by Stefan carlsson on April 1, 2019 at 1:00pm — 3 Comments

Dual throttle Rotax 912ULS

I have a dual throttle setup on my 701 with a Rotax 912ULS This is the kit that zenith provides with two cables. There seems to be a lot of pressure pulling the two throttle arms on the carbs back to full. If I take my hand off the throttle it will advance the RPM greatly. I have to tighten the throttle lock down very hard to stop this action. Rotax says not to change the carb springs. I took the springs off to see if it was a cable issue , but no problem with the cables. I did reattach the…

Continue

Added by Jerry Griego on March 31, 2019 at 10:36pm — 2 Comments

John Heather Viking Powered Zenith Cruzer First Flight!

http://www.youtube.com/watch?v=KtJtXfx3urc&feature=youtu.be See it Fly!

Everyone please congratulate John Heather on his first flight with his Viking powered Zenith…

Continue

Added by Jan Eggenfellner on March 28, 2019 at 5:30pm — 2 Comments

N601LT For Sale in Florida _ Sun&Fun

Zenith 601XLB 2850cc Corviar powered Michigan to Florida in one day.

March 26, 2019 I flew from Michigan to Venice Florida KVNC and parked on the

ramp by Suncoast Air Center. Had good weather and tail winds till I got

in Florida, average speed 117mph or 102kts, not bad for a 601XLB. Stop by

and take a look, I’m trying to find it a new home.



I stopped off at Cook County and said hi…

Continue

Added by Ron Lendon on March 28, 2019 at 9:24am — 1 Comment

Flap tube friction between fuselage.

How much friction / how free should the main flap control tube be on a 750 when fitted I don’t want to rivet it just in case. I can turn it by hand without much effort but is not free like in a normal baring. thanks

Added by Darren Weston on March 26, 2019 at 5:24pm — 2 Comments

Waiting for order to arrive ...

Realizei o pedido do material através do representante no Brasil: http://www.aviacaobr.com.br/

Estou aguardando o pedido chegar.

A última informação recebida foi que o pedido já foi despachado pela Zenith.

I made the request of the material through the representative in Brazil: http://www.aviacaobr.com.br/

I'm waiting for the request to arrive.

The latest information received…

Continue

Added by Disney Martins de Melo on March 26, 2019 at 7:44am — No Comments

Airworthiness Inspection -COMPLETE!

Had Todd Davis from the Milwaukee FSDO come to do my airworthiness inspection this AM. Super nice and super helpful!Thank you both FAA and EAA for the great documentation and support. WOW! 

Added by Mark Baenen on March 19, 2019 at 8:31pm — 7 Comments

Corvair-powered STOL CH 750

Todd Davis from the Milwaukee FSDO come to do my airworthiness inspection this AM. Super nice and super helpful! Thank you both FAA and EAA for the great documentation and support. WOW!

Added by Mark Baenen on March 19, 2019 at 8:30pm — 1 Comment

Flying with hand controls this summer

Flying with hand controls this summer

Added by Jan Eggenfellner on March 8, 2019 at 9:00pm — No Comments

Painted

Things are finally coming together.20190307_165135.jpg

Added by jeff will on March 7, 2019 at 4:38pm — 1 Comment

EAA Amateur Built Certification Kit

For anyone just starting out or almost finished, I HIGHLY RECOMMEND the EAA's Amateur Built Certification Kit. It has all the forms, all the steps and all the right language to make getting your paperwork done correctly very easy. It also has good recommendations on the timing to send the various forms in. SUPER helpful!

Added by Mark Baenen on March 6, 2019 at 2:47pm — No Comments

rubber seal for front of canopy

I am looking for a larger rubber seal for the front of my canopy.  Trim Lock DD1201 has been suggested, but a 25 foot piece sells for $80.   I was wondering if someone had a leftover 8 foot piece that they would be willing to sell.

Added by Alan Lansing on March 5, 2019 at 10:57am — 20 Comments

I am currently finishing up with the wing mod on a friends 601XL and have a 601 partial build waiting in storage.  I have   built a RV-8 which I sold and had a Cassutt for a few years.  I worked for …

I am currently finishing up with the wing mod on a friends 601XL and have a 601 partial build waiting in storage.  I have  

built a RV-8 which I sold and had a Cassutt for a few years.  I worked for the Oklahoma Air National Guard for forty years and retired from Air Force with 43 years, 8 months and 23 days service.  I was always in aircraft maintenance and flew for 

13 years as flight engineer on C-97 =C-124 aircraft.  All my other time was on fighters F-51, F=80, F=86D,…

Continue

Added by arthur l saunders on March 4, 2019 at 7:46pm — No Comments

Monthly Archives

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

1999

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

 

West Coast USA:

Transition Training:

Pro Builder Assistance
 

Pro Builder Assistance

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service