Frank Roush
  • Albuquerque, NM
  • United States
Share on Facebook
Share
  • Blog Posts
  • Discussions
  • Events
  • Groups
  • Photos
  • Photo Albums
  • Videos

Frank Roush's Friends

  • Joe Pringle
 

Frank Roush's Page

Profile Information

Aircraft Model
ZODIAC CH 601
Project Status
Flying
Building From
Purchased finished aircraft
Engine installed (or plan to install)
Continental O-200
Your website (about your aircraft...)
http://13905 Villa Sandia Place NE
Building Experience
No Experience
Flying Experience
Sport Pilot (or Ultralight)

Comment Wall (3 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 2:29pm on October 11, 2019, Eugene Stone-Romero said…

Greetings Frank,

I also fly a CH601XL. It is hangared at KBRG (Belen). I would be interested in communicating with you on a variety of issues surrounding our planes. My email address is wolfcub1945@gmail.com/

At 4:19pm on September 15, 2019, Glenn Johnson said…

Frank, check rigging first.  Next my issue was when I built it I did a difference of about 5MM on one wing.  Builder error.  I called Roger and he basically said fly the plane it will be fine.  I do have a very heavy left wing and first flight my arm hurt for days.   Checking rigging helped and after much research I found a video about heavy wings.  As our planes have a "radiused " trailing edge you need to lightly squeeze the trailing edge of the light wing.  Do a small amount at a time and test fly.  Took me two squeezes to make it right.  Now I can trim it hands off unless I fly with one tank near empty.  You are not flatting the trailing edge, just reducing the radius.  

At 10:28am on September 15, 2019, brad cohen said…

You might want to recheck that the wings are properly installed and rigged, instructions int he blueprints, and I'm sure Roger at ZAC will help you if you didn't get the 'prints with the plane

 
 
 

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

Transition Training:

Pro Builder Assistance
 

Pro Builder Assistance

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service