Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
4 point harness crossbar
Direct "knock-off" of John Austin's modification. I tacked the fitment with MIG, and will have certified aircraft welder (friend)go over everything with TIG and (I suspect) heat treat post weld if necessary.
Comment
-
Comment by Joe Hopwood on May 31, 2018 at 10:30am
-
Hi David. Where does the bar attach in AC?
-
Comment by Doug Malloy on June 18, 2017 at 10:32am
-
Initially, I was just going to go the standard Zenith seat belt route. But, yesterday I was looking at my seat belt bracket on the pilot side and noticed that there is a potential conflict with the fuel and vent tubes coming over from the right wing to the Skytek. It looks like the shoulder belt will conflict. Is that what you saw too David?
-
Comment by Daniel Niendorff on May 14, 2017 at 10:04am
-
Looks good. Four point belts are worth to work and weight from my point of view.
-
Comment by Bob McDonald on May 14, 2017 at 5:09am
-
Nice work.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers