Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
20150308_142753
Comment
-
Comment by Jorge Fernandez on April 23, 2019 at 5:11pm
-
Reliving an old topic. I'm in the process of collecting tools for my Cruzer build. Will be going to Mexico in June. Just an FYI. On the homebuilt help videos and other places, I've seen it suggested that if a rivet is tight going in you can use a drill bit to open the hole slightly. My only concern would be burrs. The reason I bring this up is I found a company on Ebay that was selling #20 Cogsdill in/out deurring tools for about $10 and on Amazon I found #20 reamers for $6. Just a couple of bargains I thought I'd pass on for anyone interested.
-
Comment by Clint L Gosch on March 9, 2015 at 8:16pm
-
Hi Timothy, I got mine at Menards, I think it is called an Irwin Unibit. I've heard Harbor Freight sells a cheaper version that also works well.
-
Comment by Timothy Aanerud on March 9, 2015 at 1:14pm
-
Where did you buy that reamer?
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers