Just checking to see if anyone has a conical mount for an O-235 they are interested in selling. This is for a Cruzer so the I believe the CH750 STOL or CH650 mounts would work. Thanks!

Mike

Views: 171

Reply to This

Replies to This Discussion

I have been looking for one for my XL601B but no luck. Am also looking for a cowl. I am going to order some 4130 in the morning and build a jig and make my own mount for the 0-235 C1B

Are they not available from Zenith?

Engine mounts are available from Zenith.  

Check this link..     http://zenair.weebly.com/lycoming.html

I think they want to make it and save some money ?
Started fitting tubes on my 0-235 c this evening, will start tack welding tomorrow. Should not have over a hundred dollars in jig and steel
Material Cost and Gas is least expense , knowing how to weld the Chrome Moly and make the Mount that will support the Motor and not break and fall off in flight or run up. This requires a lot of skill from what I have seen ,that most of us do not have, I hope you have. Good luck!!
Well I not a retired dishwasher! Lol. Gas welding is not all that tough. Keeping everything from warping is the hardest thing for me. You have 8 fixed points that must line up when your done welding. Just for the record though, I have welded a,Double Eagle, Legal Eagle, And a WagABond.

Interesting, like to see it when finished.
Did you get it finished yet, does it fit to your liking?? Would like to see finished Mount. Tks Wayne

it fits I wont cut cross tube until engine mounter to firewall and will then tack weld in place

RSS

New from Zenith:

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


New Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


New Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz.

Builder & Pilot Supplies:

Zenith transition training

and Sport Pilot:

Quality Sport Planes
Cloverdale, California:

 
Building and flying supplies:

© 2017   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service