My fuel pump was leaking oil from the gasket between the pump and engine. I have new gaskets but am curious as to how to install. It appears that the old gaskets installed at the factory had some type of liquid glue or sealant on them. Do I just install the gaskets dry and torque them down or do I need to put some type of sealant on them? Its a version 3 3300.

Views: 78

Reply to This

Replies to This Discussion

Disregard I found the answer in the overhaul manual. 

Why don't you share the answer?  :>)

John

N750A

Page 125 of the overhaul manual states this:

• New gaskets must be used when re-fitting the pump. All joints must have 1 face coated with Loctite 515 sealant.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2020   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service