Online Community of Zenith Builders and Flyers
Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
continental 0-200Hi I am at the stage of the build where I need an exhaust for my plane does anyone know if there is an off the shelfe exhaust that will fit… Started by Russell Bell |
1 |
Jun 25, 2012 Reply by Jim B Belcher |
fuselage cage 750Hi everyone Im starting the cage install on the 750, there is a problem lining up the lower fuselage section and cage I have about 45mm of… Started by Philip James Weston |
4 |
Jun 24, 2012 Reply by Aaron May |
Prop selectionhey newbie to the group!! so could use your help Would like to no what propellors, size and pitch are being run on your 750's with o-20… Started by Clay Hightower |
2 |
Jun 20, 2012 Reply by Ken Ryan |
Wing StrutsHi l have just purchaced a Ch 701 which need repairs l want to replace the wing struts does any one have the dimension of the aluminum wing… Started by Geoff Storey |
2 |
Jun 13, 2012 Reply by Geoff Storey |
Do I Need a Special Head for A6 Rivets?I got my Edition 3 plans and wing upgrade parts recently and noticed that the new wing root ribs need A6 rivets instead of the previous two… Started by Paul Sanders |
5 |
Jun 12, 2012 Reply by John Austin |
More Light weight Interior stuffOK Guys and Gals, Just to put in my thinking on two items that were brought up on the light weight interior: About crushability and ene… Started by Phil Smith |
1 |
Jun 9, 2012 Reply by Bob Pustell |
Instrument Panel PlacardsI initially labelled my panel with adhesive vinyl letters. However, the local vinyl shop didn't want to make the lettering any smaller than… Started by John Austin |
0 | Jun 8, 2012 |
Contact Magazine Alternative Engine SymposiumContact Magazine is hosting their annual alternative engine symposium this Sat. June 9th in congunction with the Golden West Fly-in in Mary… Started by Woody Harris |
1 |
Jun 8, 2012 Reply by Stephen R. Smith |
Data and Fuel Cap EngravingWe are excited to add data plate and fuel cap engraving to our product lineup. You've spent all this time on your project, and it is the… Started by Steven Tschurwald |
0 | Jun 7, 2012 |
Riveting HELP neededOn the CH650 the outboard upper and lower spar cap angles are .032”. When I rivet the area of the spar with the thinner angles it is like… Started by Tim Smart |
0 | Jun 7, 2012 |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).