Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Open Discussion Forums (non model specific) (2,834)
| Discussions | Replies | Latest Activity |
|---|---|---|
Sheet metal crimper toolAlright, how the heck does one make those neat crimps in the sheet metal for the curved L angles etc.? I inherited a simple metal crimper w… Started by Jim and Amelia Isaacs |
6 |
Jul 5, 2016 Reply by Jim and Amelia Isaacs |
looking for dual controls for a 601 xlblooking for the dual controls for the 601xlb i would like to convert for dual instruction if someone wants to sell for a reasonable price… Started by joseph aloof |
1 |
Jul 2, 2016 Reply by Steven Mogg |
Aveo Blantantly Lied About Their Products According to the FAASee FAA Unapproved Parts Notification #No: 2016-20110831001 Information discovered during an FAA suspected unapproved parts investigation… Started by Gary Welch |
10 |
Jul 1, 2016 Reply by Rick Lindstrom |
Jabiru 3300 with bing carb. - info on jettingI have a Jabiru 3300 made in 2003 (serial #33A489). Recently the engine began to run very rough and some plugs on the pilot side were wet. … Started by Carl Eichenauer |
2 |
Jun 30, 2016 Reply by John Austin |
engine choiceStill trying to decide engine type. Looking very seriously at Azalea corvair conversion. Just seems to be so hard to get a straight answer… Started by Lawrence A Anderson |
11 |
Jun 29, 2016 Reply by Lawrence Bird |
First FlightSo this evening, the rudder kit purchased on April of 2005 took its maiden flight. Of course there were a few more parts attached to it. Th… Started by Richard Simmons |
23 |
Jun 28, 2016 Reply by Mack P. Kreizenbeck |
Inexpensive crimperLooking at crimpers and they are expensive!! Wondering if anyone has good experiences with this ratcheting crimper from Titan. I've seen a… Started by Scott Tyler Bragg |
12 |
Jun 27, 2016 Reply by John Austin |
Looking For CH750 Builders Near Cold Lake, AlbertaI've had a phone call from a prospective CH750 builder in Cold Lake, Alberta...Canada. Are there any builders out in that part of the count… Started by Bob McDonald |
4 |
Jun 24, 2016 Reply by Michael W Mallock |
Fuelish question?For those engines that require auto gas from the local off-airport "service" station, here in California the spectre of ethanol rears its u… Started by Wayne Tyson |
26 |
Jun 21, 2016 Reply by Gary Welch |
Aircraft RegistrationI bought another airplane last month, and promptly lost the Notarized Bill of Sale and Registration Application. Does anyone know how best… Started by Wayne Tyson |
1 |
Jun 18, 2016 Reply by David Krakowsky |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
