Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Open Discussion Forums (non model specific) (2,835)
| Discussions | Replies | Latest Activity |
|---|---|---|
Zinc Chromate (Cortec) Primer sourceHi guys Was trying to source the zinc chromate primer that is brushed on. . I ve done a search on here and online but not found a link to… Started by Michael T. |
12 |
Nov 28, 2017 Reply by Joe Spencer |
Just making sure I`m reading the DCS right- The Rudder Horn is also 6061-T6Hi guys I`m ordering some material and just want to double check the rudder horn and Elevator horn plate construction In my DCS it calls… Started by Michael T. |
0 | Nov 27, 2017 |
Does it matter how fast aluminum gets bent?I was going to try bending aluminum stiffener(L shaped) that's longer than 8 feet. But doing it in a gig, the metal will be slam formed. Fo… Started by Michael T. |
0 | Nov 26, 2017 |
Adding right seat brakes.I've searched the 750 page a bit, builder resources, and some good ol' fashioned Googling, but haven't happened upon what I expect is a sim… Started by Conor Whitehead |
9 |
Nov 25, 2017 Reply by Loren Warner |
Big tires on 801Looking to put big tires on my 801. Has anyone done this also have a 76x56 prop want to put a cat to 86 38 on any one done this also Started by Jerry |
0 | Nov 24, 2017 |
Real World experience with warp drive props and rain?As "winter" (read "rain") approaches in Northern California I would like to hear from those who have flown with a warp drive prop in the ra… Started by Gary Welch |
4 |
Nov 24, 2017 Reply by Loren Warner |
Any Info on CH100 ?Who is still flying a CH100 and has built one? I like to get in contact with a builder / flyer. I am considering buying an unfinished kit a… Started by Guillaume Klaaysen |
0 | Nov 21, 2017 |
trim tab angleI Just finished the elevator trim tab and found that the angle in the up position meets the specs 20 ° +- 2 but in the down position it st… Started by Juan Gonzalez |
2 |
Nov 21, 2017 Reply by Glenn Davis |
Lycoming angle valve IO360Has anybody Installed a Lycoming IO360 Angle valve engine on an 801? If so I would like to get some pointers Thx. Started by Scott Malone |
0 | Nov 21, 2017 |
Let there be lightDon't ask me why but I got the wild hair to add lighting to my CH 701. Actually I can now kind of legally fly after sunset adding another… Started by Phil Smith |
6 |
Nov 19, 2017 Reply by Jonathan Kreilich |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
