Jerry Latimer's Comments

Comment Wall (12 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 5:41am on June 18, 2021, Michael Mccarthy said…


My name is Mr. Michael Mccarthy, I have contacted you before without any response from you. Please replied if you receive this message. I have something very important to discuss with you, I have a vital information to give you. Could you please get back to me on ( ) for full details.

Michael Mccarthy.

At 11:01am on November 10, 2020, Karl Kiltz said…

Hi Jerry,

Thanks for the information on the VG's. After reading your comments and info from other pilots I will give this serious consideration over the winter.



At 6:16am on June 24, 2017, Mark Gravatt said…

Thanks!  It's great to find more local Zodiac builders and pilots!

I am looking for some local flying clubs to get more active in the east valley area.  CHD, FFZ, Pegasus...

Any thoughts?


At 11:46am on October 26, 2015, Larry Nelson said…
Thanks Jerry
At 7:26pm on June 26, 2015, Carlos Sa said…

Hello, Jerry

A while back (September?) you got a set of Azusa tires.

How has been your experience so far?



At 5:09pm on December 22, 2014, Steve Freeman said…

Hi Jerry,

If the camera is mounted on the rudder - are you running a cable all the way from your headset jack, out the canopy and to the camera mounted on the rudder?  Do you have a picture of this set up? Thanks for the info on the polishing.  After the holidays is fine...I am at my hangar a lot during the weekends.  I can also be out there during the week any time with advance notice.  I am lucky enough to work from home and for the most part, set my own hours. I will be gone from Jan 13-19 though on business.  Would love to meet up before then.


At 12:03am on January 8, 2012, Steve Freeman said…

Hey Jerry...

Had fun flying to SEZ today.  Was the flight out as uneventful as we hoped?

I reached out to the APA president (Jim Tims)  and he has a Jab 3300 in his plane.

Do you knowthe guys name or contact info in Fountain hills?


At 3:05pm on July 29, 2010, Chris Aysen said…
I have the same cowl you have and the same problem in the same attitudes. However, the highest temp I seen was 230 but my outside air temp might have been 85. Everything sounds right when comparing our two situations. Thanks for the response.
At 12:07pm on July 29, 2010, Chris Aysen said…
Jerry - What was the temp when you say "high oil temps"? - Chris
At 11:56pm on July 13, 2010, Dr. Edward L. Olds III said…
Congratulations on the first flight! I learned a lot from my visit with you last winter and your plane was well done! Have a wonderful time flying off those hours!.
Ed Olds
At 9:22am on July 11, 2010, Carlos Sa said…
Congratulations, Jerry!

It's a beautiful Zodie !

CH601-HD, plans
building rear fuse
At 8:38pm on April 24, 2010, Dave Gardea said…
Congratulations on your major milestone of taking her to the hangar! Great looking plane and polish job!



New from Zenith:

Zenith Planes For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits

Zenith Apparel from EAA:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

How to videos from

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit for the latest DVD titles.

Aircraft Insurance:


West Coast USA:

Pro Builder Assistance:


Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2021   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service