Online Community of Zenith Builders and Flyers
After a couple of weekends of work I have finished making a 1/4" radius nosebar for my brake. Since there are very few pieces that need a 1/4" radius bend I originally tried to make a nose bar out of plywood to use on my 4 foot brake. However it was just not up to the task of bending the .063 pieces of aluminum needed for the firewall.
I fabricated a similar 1/8" radius nosebar four or five years ago. This is not the first time I have made a nosebar. The stands I made, mentioned in another post, came in quite handy for supporting the material for the new nose bar.