Online Community of Zenith Builders and Flyers
I´m about to bend the H-tail feather spars to my plans built 750. The manual gives me a dl for the stabilzer front spar blank of 141mm while the flanges are 20mm and web 107mm. As I suspected the dimmentions didn´t add up when I ran a test piece. I ended up 3 mm short on the web after compensating 1mm for each of the flanges. The next time I tried, I had the web + flanges -2mm compensation for the bend radii (107+(2x20)-2=145 dl) now I am 1mm on the plus side on the web. All…Continue
Here's the follow up report on a successful 2012 EAA AirVenture "Oshkosh" Fly-In Convention. Attendance appeared to be good, with strong interest in our aircraft. We enjoyed meeting with both new and old Zenith builders!
Zeniths at AirVenture 2012 - Summary Video Clip:
Flight to Oshkosh: Roger flies the Zenith CH 650:…Continue
Hi everyone been a member for a while first post so here we go I have 601xlb built in AMD Eastman Ga almost 100 hrs nose wheel and rudder is still hard any ideas are redesign thanks DVB