Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
100_1378
Comment
-
Comment by Heinz Genrich on September 14, 2010 at 6:39pm
-
Hi,Bob!
If you look at the other float pictures,you will see that that plate is NOT the main attachment point.There is another plate going to the bottom of the float which carry any landing loads to the bottom of the floats
-
Comment by Bob McDonald on September 14, 2010 at 1:44pm
-
If this attachment plate to gear leg was made of stainless steel in would be much stronger. The plate could have been made in a "U" shape with the gear leg bolted between the "U" plate sides. THe PJ floats on my Challenger used stainless "U" bracket and a single AN3 bolt through the gear leg to mount the floats.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers