Open Discussion Forums (non model specific) (2,142)

Discussions Replies Latest Activity

Clean, wax, protect the aircraft

I'm searching the best soap and the best wax (or both in the same bottle ?) to clean and restore the paint on my CH-701; I looked in the ca…

Started by Carl Tremblay

2 Apr 21, 2009
Reply by Carl Tremblay

ATD 5830 rivet gun problem

My rivet gun began spewing air out of the hole underneath the trigger? The instructions for dismantling it are pretty bad! Any ideas? Pictu…

Started by Dr. Edward L. Olds III

2 Apr 21, 2009
Reply by Dr. Edward L. Olds III

Flutter/hinges

Has anyone found out if the aircraft in question had regular hinges, or the sheet metal hinges?

Started by William Campbell

2 Apr 20, 2009

Phone numbers and e-mails

Is there a place on this site where a person can find the phone numbers and e-mails of builders to use in making contacts? If there is, I h…

Started by Dr. Edward L. Olds III

2 Apr 8, 2009
Reply by Dr. Edward L. Olds III

New Zenith Product

Pretty funny... has Chris no shame at all? ;) http://www.zenithair.com/4-1-zenith-flyer.html

Started by George Harris

1 Apr 2, 2009
Reply by Taylor Ogden

Olfa Knife - SEM pictures for the curious builder

Thought I would share some pictures I took of what an Olfa knife does to a sheet of aluminum. Enjoy! Ben Church CH801 Racine, Wisc.

Started by Ben Church

5 Apr 2, 2009
Reply by Taylor Ogden

Creases in the aluminum, on the top surface of the wings

Is it my imagination, or do I detect some creases on the top surface of both wings in the latest 750 factory video. Look to the left side o…

Started by Robert Pelland

2 Mar 29, 2009
Reply by Burke Johnson

Corvair Engine and the CH 750.

First let me say that I am not an engineer and I don't pretend to be one. Most of my structural integrity lessons were learned in the schoo…

Started by Donnie Moore

1 Mar 28, 2009
Reply by Gus Warren

DIY Metal Brakes for .093 and .125

I am just starting to go through my plans and noticed some of the metal is upwards of .125 thick. I am planning on building a brake myself…

Started by Grant Arthur

5 Mar 20, 2009
Reply by Grant Arthur

MGL Enigma

Any folks out there using, purchased or plan on using any of the MGL EFIS products?

Started by Richard Simmons

8 Mar 20, 2009
Reply by Bill Morelli

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

Transition Training:

Pro Builder Assistance
 

Pro Builder Assistance

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service