hi guys 

I'm building a CH640 so I don't know much about the high wing members of the family

Is the flap slot open on the fuselage side....on all models?....

 I was curious if something can be done to close up or modify the flap slot...I thought it might get drafty in the winter..I saw a you tube video of a plane that had removed it by making the flap shaft internal to the wing...is that a common modification?

if you guys could educate me on this item...much appreciated...

Michael

Views: 334

Reply to This

Replies to This Discussion

A detailed description of the "no slot flaperon" mod can be found here: http://www.liming.org/ch801/FHNSF.html

From my observation over the years as forum moderator, I wouldn't describe it as a "common" mod, but I do believe several members have done this on 801's and 750's.  If I was doing a build now, I'd definitely give it serious consideration.  I'm pretty sure that the fuselage kit's skin could be ordered from Zenith with the slots deleted.

However, the slot is not drafty at all.  On the inside of the fuselage, the slot and the entire flaperon control arm are totally enclosed - you can see the vertical enclosure on the right in this picture:

There is a small access hole near the top of the internal cover so you can access the nut where the control arm connects to the flaperon, but this is typically plugged with a metal or plastic plug.

As I said, if I had it to do over again, I would likely delete the slot.  In my area (East Tennessee), we have a problem with dirt daubers/mud wasps and more than once I've discovered one of their mud nests inside the slot.  I finally made a "plug" for the slot by slotting a sponge on one side and facing it with a felt-like material so I can easily slip it between the inboard flaperon end and the slot to plug it when hangared:

I need to (and will!) flag these with red "REMOVE BEFORE FLIGHT" streamers, but I don't think they exhibit enough wedging force to jam the controls if I forgot to remove them.

John

N750A

Thank you for the detailed explination

much appreciated 

Michael

Gary Liming has a very good write up on this mod in the 801,  available at link below......

http://www.liming.org/ch801/FHNSF.html

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service