I picked up a Pmag for my 0-200

any suggestions on where to get a manifold pressure connection?

thanks

Dave

N601XP

Views: 242

Reply to This

Replies to This Discussion

intake manifold above carb, you'll see 2 ports. 1 each side. one might be used as primer in your install

Thanks Christopher
I’ll take a look there.
Dave

got it plumbed? can also T-off if you want MP...if MP might wander a bit unless an orifice installed

I see you have D-180 hook up to mp sensor and you get % power with a fuel flow counter installed

Update
My right slick mag crapped out so I finally installed my Pmag
Did a 1/2 hour test flight, all good so far
Further testing next.
Hope to find another Pmag for the left side, anyone have one they want to part with?
I believe my 4301 slick needs a new distributor cap and gear, I’d like to find those parts for a backup, cheap!
500 hour inspection kits are ridiculously priced.
Any suggestions?
Dave

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service