I'm posting below our recent Annual Checklist in hopes to help aid everyone. It is open for debate, thoughts, ideas etc. Hopefully will help anyone looking for direction in this arena. -Alissa/Jan

Views: 417

Reply to This

Replies to This Discussion

You used to recommend adjusting the valves annually. Has that changed?

Glenn Davis

We still do Glenn, we have just forgotten it on this list and will add. 

I'm not necessarily against doing these checks, but 

- Why change the alternator belt annually if the conditional inspection shows it's still good?  

- Why replace fuel system prefilters annually if they are visibly clear of contaminates?

- Why check compression if all engine parameters are normal.  

- On another list you recommend checking intake and exhaust valves annually, but if compression is good then why bother?

I'm not necessarily against doing these checks, but 

- Why change the alternator belt annually if the conditional inspection shows it's still good?  

- Why replace fuel system prefilters annually if they are visibly clear of contaminates?

- Why check compression if all engine parameters are normal.  

- On another list you recommend checking intake and exhaust valves annually, but if compression is good then why bother?

Basically use your judgment on the belt if you have flown very little hours and it is fine, it doesn't have to be changed. However, the belt is like $5 and if anyone is questioning changing it. You can or should. 

Same goes for the pre filters, it is a very affordable and easy change, but if it isn't needed, don't do it. The biggest thing is avoiding the filters in the fuel pumps from getting contaminated and causing fuel flow issues. A pre-filer is a couple bucks, the fuel pump is a much larger and timely expense. 

Compression is also easy to check by turning the propeller, if your comfortable doing so.

We need to add the checking valves annually, we forgot to add it on here. 

The biggest thing is trying to provide a list if someone wants a thorough list for those that need and want it and to use your best judgement. As an experimental not all of it is necessarily required, but it is a good starting point. 

We covered a lot of this and the reasonings why in todays engine workshop, we will try to publish what we have in video, wish you could have been here, you would have loved it.

-Alissa 

How do I delete a double post?

All of these checks are easy enough, but annually seems a bit much.  I understand the valve lash should eventually be checked because their not hydraulic, but to me it makes more sense to do it based on condition and or hours, vice calendar.   Same with compression check.  

As for doing compression, seems to me that it should be done by engaging the start motor with all spark plugs removed and the air inlet fully open.  What am I missing?

We can discuss all of this even more when you come up here for the Great Alaskan Aviation Gathering in May.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service