Sold 3.0L Corvair Engine Still have the engine mount and Airframe Parts

I am selling a corvair 3.0L engine with 38 hours and all the associated accessories that was mounted on a CH601.  There is no damage to the engine.  I had low compression on #3 cylinder, leaking between head and cylinder, sent to SPA for repair and reinstalled with new head gaskets. Ran the engine today 6/29, it ran well. checked the cylinder compressions all over 70 except for #3 was 60/80 and leaking past the rings. All parts for the engine were purchased through Clarks corvair, SPA and flycorvair.com (William Wynne). $Make me an offer.  I also have a Stainless intake $200 and exhaust with carb heat and cabin heat $500 for a CH601, D&G rebuilt MA3S-PA carb $600, Warp Drive 2 blade ground adjustable with spinner and back plate $700, Engine mount $400, Engine Cowl  JSWESEMAN.COM  with WW nose bowl and enlarged air inlets $400, 30A John Deere PMG $100.  I have many other parts, just ask.  Send me a message at robsley@hotmail.com and I will get back to you. Parts are located in Memphis, TN.

I also will be selling a set of HDS wings with fuel tanks  and heated Pitot installed.  A set of HD wings with nav lights, no tanks.

Views: 667

Reply to This

Replies to This Discussion

Where is this engine located?

I’d like the intake, if you don’t mind shipping it.
Thanks

Charlie
Maybe the prop as well. What is the length of the prop?

How much are you asking for your corvair?

I would purchase the Cowling and all except motor mount etc.

 Hi Robert 

checking to see if you have the engine mount and cowl with nose bowl still and a list of the other parts you can email me at dsteveson@gmail.com

thank you for your time 

Dan

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service