The bolt that connects the wing strut to the landing gear weldment, seems like it will hit the landing gear when it flexes. Am I wrong ?

Views: 434

Attachments:

Reply to This

Replies to This Discussion

Looks like the wrong length bolt.  Ours use AN6-7A.

This is an An6-7a  bolt. Double checked 

Did you actually measure?  Also, the rubber does not look right to me.  Our rubber does not stick out so far that needs trimmed for the nut/bolt to fit.

Sorry I don't have a close-up, but maybe this gives an idea how far back our rubber sits compared to yours.

No photo description available.

I measured bolt. The rubber needs trimmed , I agree . Its after market rubber . But the bolt length is my concern . 

While I don't have a photo readily available of our strut bolt installed, I don't remember ours being that close.  Any idea how many threads extend beyond the nut?  Maybe just change the bolts thread length.

1 thread shows. I cant believe I'm the only one to have issue with this .

1/8 inch gap , without threads showing. Closer to 1/16th once threads are thru. 

 This cant be right . But it is to plans . 

Attachments:

Guess it's the aftermarket rubber making the bolt look so long to me.  I'm surprised others have not chimed in.  Don't recall how many threads were through the nut on ours, but one should be fine; although I believe building standards may say two.  While not preferable, you can always install with the nut on top.

I would lower the gear and install the bolt from below.  

Yup, that's the plan now. 

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service