On the standard ignition modules I connected the shield side of my magneto wire to ground and the spade to the mag switch.  In operation, the switch would ground the wire from the spade when off, open when operating.

I have yet to run this engine but in doing some preliminary checks, find that when I use a continuity tester on the spade that the mag switch connects to, I get continuity to ground, even when nothing else is attached to it.

That doesn't seem right to me so I assume I am missing something here.  Hopefully one of you can enlighten me.

Tim

Views: 324

Reply to This

Replies to This Discussion

Continuity to ground is not the same as shorting that point to ground. Measure the spade lug to ground using a VOM and its probably not at ground potential. Someone with a Jabiru could tell you what the resistance reading should be. I'm sorry, but I don't have a Jabiru. I wouldn't worry about it until you test run your engine. If the switches don't kill the engine, just turn off fuel flow until engine stops. Then troubleshoot any problem.

Jim

Tim,

Jim pretty much nailed it on the head.  I found the exact same issue and called Pete at JabiruUSA about it.  He said pretty much the same thing.  As long as your connections through the switch and out to ground are sound, it will work and turn off your engine.

Good luck,

Dave

Thanks guys!  I got a good explanation from a fellow on the Matronics site so I am content that the wiring is correct.

Dave, I'm sure you're going to Oshkosh as am I.... this will be my 40th consecutive convention :-)  The monday after Oshkosh I go in for a total replacement of my right hip.  If it were not for the hip acting up I'd be flying by now.  I have about two days worth of work at home and the XL will be ready to truck to the airport and assemble.   You'd think after all these years I'd catch a break  :-)

Tim

TIm,

I plan to be at Oshkosh Sunday to Sunday as usual.  I have signed up to work the Zenith Give Flight booth from noon to 5 on Monday and may pick up a shift later in the week if they need more help.  Drop me a note when you hit your campsite and I will try to stop by.  Sorry to hear about the hip.  Hopefully you will be back to doing jumping jacks in no time :)  This will be my 37th Oshkosh and 25th straight.  I feel like a rookie compared to you!

See you there,

Dave

16 should be fine. It's just a ground I don't believe it sees much current.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service