Mark Colbeck's Videos (Zenith Aircraft Builders and Flyers) - Zenith Aircraft Builders and Flyers2024-04-19T22:05:24Zhttps://zenith.aero/video/video/listForContributor?screenName=0kjx0ab6dg89c&rss=yes&xn_auth=noSTOL CH 701 First Taxitag:zenith.aero,2011-04-25:2606393:Video:1173552011-04-25T00:34:02.235ZMark Colbeckhttps://zenith.aero/profile/MarkC
<a href="https://zenith.aero/video/stol-ch-701-first-taxi"><br />
<img src="https://storage.ning.com/topology/rest/1.0/file/get/2180841295?profile=original&width=240&height=135" width="240" height="135" alt="Thumbnail" /><br />
</a><br />First Taxi run in the GUPE.
<a href="https://zenith.aero/video/stol-ch-701-first-taxi"><br />
<img src="https://storage.ning.com/topology/rest/1.0/file/get/2180841295?profile=original&width=240&height=135" width="240" height="135" alt="Thumbnail" /><br />
</a><br />First Taxi run in the GUPE. Engine Starttag:zenith.aero,2011-03-22:2606393:Video:1094402011-03-22T15:51:02.325ZMark Colbeckhttps://zenith.aero/profile/MarkC
<a href="https://zenith.aero/video/engine-start"><br />
<img alt="Thumbnail" height="135" src="https://storage.ning.com/topology/rest/1.0/file/get/2180841162?profile=original&width=240&height=135" width="240"></img><br />
</a> <br></br>I have attached a video of the panel and reading. Everything looks as it should (please comment) maybe i was excited when I first started and did not read the gauges accurately. I have not turned on my avionics master in this video that is why some of the readings are zero. I did run up to 3000 rpm and CHT and EGT all came up. I do need to look at my fuel pressure sensor, as it was reading before when i…
<a href="https://zenith.aero/video/engine-start"><br />
<img src="https://storage.ning.com/topology/rest/1.0/file/get/2180841162?profile=original&width=240&height=135" width="240" height="135" alt="Thumbnail" /><br />
</a><br />I have attached a video of the panel and reading. Everything looks as it should (please comment) maybe i was excited when I first started and did not read the gauges accurately. I have not turned on my avionics master in this video that is why some of the readings are zero. I did run up to 3000 rpm and CHT and EGT all came up. I do need to look at my fuel pressure sensor, as it was reading before when i turned on the fuel pump, but it is showing zero right now. Thanks to everyone for the help and sorry if I was causing confusion. Worried and excited at the same time.......