Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Hello. Can I use 0.125 aluminum angle instead of 0.093 for my scratch build aircraft?
Comment
-
Comment by Lampros on November 1, 2018 at 12:54pm
-
Thank you for taking the time to answer my question.
-
Comment by Joe Harrington on October 31, 2018 at 10:49pm
-
I also did on my 750. I think many scratch builders do also because it is more commonly available. If I recall correctly, someone cleared it with Caleb who used to be their onsite engineer.
-
-
Good information. It looks there is more than enough grip allowance for the rivets. Have this change been approved by the factory or maybe the community?
-
Comment by Bryan Ekholm on October 31, 2018 at 6:05pm
-
I did on my 701.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers