Comments - Fuesalage side cut outs - Zenith Aircraft Builders and Flyers2024-03-29T15:48:40Zhttps://zenith.aero/profiles/comment/feed?attachedTo=2606393%3ABlogPost%3A731231&xn_auth=noMany thanks to all who contri…tag:zenith.aero,2020-08-24:2606393:Comment:7336532020-08-24T23:53:06.103ZThomas carlinhttps://zenith.aero/profile/Thomascarlin460
Many thanks to all who contributed to my enquiry about the side cut outs much appreciated
Many thanks to all who contributed to my enquiry about the side cut outs much appreciated Here is a good description of…tag:zenith.aero,2020-08-09:2606393:Comment:7317212020-08-09T00:36:28.103ZDaniel Niendorffhttps://zenith.aero/profile/DanielNiendorff
<p>Here is a good description of the no-slot mod. Worth a look.....</p>
<p><a href="http://www.liming.org/ch801/FHNSF.html" target="_blank">http://www.liming.org/ch801/FHNSF.html</a></p>
<p>Here is a good description of the no-slot mod. Worth a look.....</p>
<p><a href="http://www.liming.org/ch801/FHNSF.html" target="_blank">http://www.liming.org/ch801/FHNSF.html</a></p> I've seen it on an aircraft s…tag:zenith.aero,2020-08-09:2606393:Comment:7317662020-08-09T00:24:56.452ZClint L Goschhttps://zenith.aero/profile/ClintLGosch
I've seen it on an aircraft some where on this forum. Definitely looks better. I recall some custom steel parts had to be fabricated, maybe the biggest drawback it is adds weight? Don't know....
I've seen it on an aircraft some where on this forum. Definitely looks better. I recall some custom steel parts had to be fabricated, maybe the biggest drawback it is adds weight? Don't know.... any thoughts of going the slo…tag:zenith.aero,2020-08-08:2606393:Comment:7315792020-08-08T00:30:38.041ZDaniel Niendorffhttps://zenith.aero/profile/DanielNiendorff
any thoughts of going the slot free route?
any thoughts of going the slot free route? I did the same.tag:zenith.aero,2020-08-07:2606393:Comment:7314982020-08-07T05:08:18.576ZDel Cloweshttps://zenith.aero/profile/DelClowes
<p>I did the same.</p>
<p>I did the same.</p> Hi Thomas, I waited to cut m…tag:zenith.aero,2020-08-06:2606393:Comment:7312362020-08-06T01:20:01.277ZClint L Goschhttps://zenith.aero/profile/ClintLGosch
<p>Hi Thomas, I waited to cut mine until I mounted the wings and flaperons, this allowed a very accurate slot to be cut by tracing the arc of the flaperon on the fuselage side. </p>
<p>Hi Thomas, I waited to cut mine until I mounted the wings and flaperons, this allowed a very accurate slot to be cut by tracing the arc of the flaperon on the fuselage side. </p>