Comments - A small step for me... - Zenith Aircraft Builders and Flyers2024-03-29T07:44:34Zhttps://zenith.aero/profiles/comment/feed?attachedTo=2606393%3ABlogPost%3A603230&xn_auth=noHi Erturk,
Congratulations o…tag:zenith.aero,2017-12-17:2606393:Comment:6035332017-12-17T01:15:46.427ZDaniel Niendorffhttps://zenith.aero/profile/DanielNiendorff
<p>Hi Erturk,</p>
<p></p>
<p>Congratulations on getting started! Its a big project, but one that I found very very rewarding. If you have not yet run across it, its worthwhile to check out Charles Liminig's 801 build log at.... <a href="http://www.liming.org/ch801/" target="_blank">http://www.liming.org/ch801/</a> I found it helpful while I was building mine. Good luck, and above all have fun!</p>
<p>-Dan</p>
<p>CH801 with IO-375</p>
<p></p>
<p>Hi Erturk,</p>
<p></p>
<p>Congratulations on getting started! Its a big project, but one that I found very very rewarding. If you have not yet run across it, its worthwhile to check out Charles Liminig's 801 build log at.... <a href="http://www.liming.org/ch801/" target="_blank">http://www.liming.org/ch801/</a> I found it helpful while I was building mine. Good luck, and above all have fun!</p>
<p>-Dan</p>
<p>CH801 with IO-375</p>
<p></p> Hi Erturk,
I just finished my…tag:zenith.aero,2017-12-17:2606393:Comment:6034432017-12-17T00:57:46.080ZFrank Traebinghttps://zenith.aero/profile/FrankTraebing
<p>Hi Erturk,</p>
<p>I just finished my project</p>
<p>Got it FAA approved yesterday - and it is flying</p>
<p></p>
<p>Very exciting when its done!</p>
<p></p>
<p>Good luck - have fun - I enjoyed it :-)</p>
<p></p>
<p>Frank</p>
<p>Hi Erturk,</p>
<p>I just finished my project</p>
<p>Got it FAA approved yesterday - and it is flying</p>
<p></p>
<p>Very exciting when its done!</p>
<p></p>
<p>Good luck - have fun - I enjoyed it :-)</p>
<p></p>
<p>Frank</p> Good luck with this. I'm stil…tag:zenith.aero,2017-12-16:2606393:Comment:6033242017-12-16T03:47:49.598ZTom Sullivanhttps://zenith.aero/profile/tomsullivan
<p>Good luck with this. I'm still a newbie after 50 years of fixing airplanes. Always something new to learn. Tom</p>
<p>Good luck with this. I'm still a newbie after 50 years of fixing airplanes. Always something new to learn. Tom</p> Welcome, Erturk! You'll find…tag:zenith.aero,2017-12-16:2606393:Comment:6034112017-12-16T03:26:04.037ZJohn Austinhttps://zenith.aero/profile/JohnLAustin
<p>Welcome, Erturk! You'll find a lot of good people here who are willing to help! We were all "newbies" once upon a time!</p>
<p>John</p>
<p>N750A</p>
<p>Welcome, Erturk! You'll find a lot of good people here who are willing to help! We were all "newbies" once upon a time!</p>
<p>John</p>
<p>N750A</p>