Comments - Spar Drilling - Zenith Aircraft Builders and Flyers2024-03-29T07:17:49Zhttps://zenith.aero/profiles/comment/feed?attachedTo=2606393%3ABlogPost%3A388669&xn_auth=noWhen I made my spar doublers…tag:zenith.aero,2014-10-28:2606393:Comment:3887762014-10-28T03:26:30.481ZTimothy Aanerudhttps://zenith.aero/profile/TimothyAanerud
<p>When I made my spar doublers I first put the bend into a strip 0.063 that was more than long enough for both pieces. I bend both ends of the strip. Then I cut the parts out. It was much easier to cut the parts to the correct size than trying to predict the correct developed length.</p>
<p>When I made my spar doublers I first put the bend into a strip 0.063 that was more than long enough for both pieces. I bend both ends of the strip. Then I cut the parts out. It was much easier to cut the parts to the correct size than trying to predict the correct developed length.</p>