Tracy Trathen's Posts - Zenith Aircraft Builders and Flyers2024-03-28T20:19:44ZTracy Trathenhttps://zenith.aero/profile/TracyTrathenhttps://storage.ning.com/topology/rest/1.0/file/get/2197112898?profile=RESIZE_48X48&width=48&height=48&crop=1%3A1https://zenith.aero/profiles/blog/feed?user=2dbck38alnbdz&xn_auth=noSuspension.tag:zenith.aero,2012-12-12:2606393:BlogPost:2537922012-12-12T03:48:17.000ZTracy Trathenhttps://zenith.aero/profile/TracyTrathen
Does anyone have information on where to find the pucks in ch300 suspension?
Does anyone have information on where to find the pucks in ch300 suspension?Alternator Whinetag:zenith.aero,2012-10-23:2606393:BlogPost:2450142012-10-23T16:50:13.000ZTracy Trathenhttps://zenith.aero/profile/TracyTrathen
<p>Installed Red Baron XP LED Strobe on vertical stabiliser. I feel much better about being seen with this strobe.</p>
<p>Maybe some of you have some suggestions on a problem. I did not build this aircraft, I bought it and am learning on the go. interesting but frustrating. There are no good groups close by to draw information from. Ive had a problem with radio whine from the very beginning.Especially on transmit. I installed a noise filter on the alternator but it didnt help much. Since I…</p>
<p>Installed Red Baron XP LED Strobe on vertical stabiliser. I feel much better about being seen with this strobe.</p>
<p>Maybe some of you have some suggestions on a problem. I did not build this aircraft, I bought it and am learning on the go. interesting but frustrating. There are no good groups close by to draw information from. Ive had a problem with radio whine from the very beginning.Especially on transmit. I installed a noise filter on the alternator but it didnt help much. Since I installed the new strobe I can hear it blipping in the headset, especially at idle. The blipping seems to get better at cruise rpm. you can also hear the flap motor when activated in the headset. everything quietens down when you turn off the alternator or the field switch. I dont understand why there is two switches.......more research. The alterator is putting out 14 volts. Is it a bad diode in the alterator or voltage regulator? I have checked the grounds and they all seem to be clean and tight. Any suggestions would be greatly appreciated.</p>