Well, I'm flattered that you think I'm moving quickly on the 601. I think I'm slow as a snail because some people who had flying airplanes got their upgrade kit after I did and are already finished and flying. I've got about 420 hours into this and barely finishing up with both wings. I did do the extra "real building" type work while I was at it so it's not quite a fair comparison.
I am in on the AS 5 rivets. Where I really need them though is on one wing that has too large holes drilled except for where I drilled the extra holes (doubled up rivets) in the added extrusion angle. Some of the other holes where it is just skin over the ribs are too large too. The rivets for the extrusion would have to be long enough for thickness of 0.125 + 0.025 + 0.025 so total of 0.175" thick. The minimum thickness would be 0.050 where it is just skin and ribs. As I understand the rivet length you are getting won't work for thickness greater than 0.125". Is that right? I could probably get by with regular aluminum Zenith supplied A5 rivets where the rivet spacing has been doubled and the grip length is 0.175". Then use the AS5 rivets on the outer section where the grip length would be about 0.085". Guess the bottom line is that I could use both AS5 rivet lengths, but I'll take what I can get.
I'm with you on the work to take care of 10 acres. We have 10 acres too. It is all pine and oak trees, but a big clean up in the spring to pick up fallen limbs and a few fallen trees. Then there is a few beetle killed trees to fall, trim out, burn limbs and cut the trees into firewood. I've not even started yet and it's near to getting too dry to burn. Then, in the summer is spray to kill poison oak and other weeds like thistle. It's nice though and the wildflowers and animals are worth the work.
I was going to comment on the frustration of not having a ready access to aircraft hardware, but ran out of the allowed space.
How are you doing? I am almost finished with the 2nd wing. I'm doing the aileron balance weight mod now. It is easier the 2nd time through. I didn't skin the first wing yet so I can check on that one to see how I did it. Fuselage next.
I emailed ComLet about the same gear upgrade but they never replied to me. Thanks for posting the prices. I would be very interested in following your progress. Because I live in Australia, freighting the Comlet gear would be quite expensive so I may go down the path of making my own FG gear in the future. I priced the FG gear from the Jabiru factory and the wanted $900 Aud per leg. Because I know the guys at Jabiru, they told me what glass and how many layers make up their gear legs. Very handy info.
The structural mods to support two FG legs as used in Europe are at the moment a mystery and would be very interested in seeing some drawings of the setup.
Nice to be your first contact on Zenith Aero. I tried to find your comments on zbag but could only find ones for November. Could you please send me a link to your comments on the safety of the Zodiac.
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.