Larry W. Sward
  • Male
  • Lexington, KY
  • United States
Share on Facebook
  • Blog Posts
  • Discussions (45)
  • Events
  • Groups
  • Photos
  • Photo Albums
  • Videos

Larry W. Sward's Friends

  • Darren Weston
  • Jonathan Fay
  • John M Greiner
  • Gary Motley
  • Lawrence Michael Wilson
  • Doug Johnson

Larry W. Sward's Discussions

Autopilot servo mounts

Started this discussion. Last reply by Joe Pringle Apr 23, 2021. 3 Replies

Getting ready to mount the MGL servos in my 750 Cruzer.Anyone have pictures of mounting a elevator and aileron autopilot servs??Continue

 

Larry W. Sward's Page

Profile Information

Aircraft Model
CH 750 Cruzer
Project Status
Just started
Building From
Kit
Engine installed (or plan to install)
Viking
Building Experience
Have worked on airplanes before
Flying Experience
Commercial / CFI
Building and Flying Info / Your Profession / Other Background Info
Mechanical engineer. Have had pilots license 48 years
Home Airport (ie. KMYJ)
KLEX

Comment Wall (4 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 12:43am on August 7, 2018, Darren Weston said…

Hi Larry

i need to see if the Viking is approved in the UK, I have emailed them and they will ship a kit less the engine so I can buy in the UK. If the 912 isn’t suitable I may have to re think.

thanks

Darren

At 10:03pm on March 18, 2018, Larry W. Sward said…
Was not happy with abs plastic tips. After a little testing on some scrap plastic, found it would fatigue cracking quickly. Due to big variation in thickness, it was pretty flimsy where rivets installed so anticipated it would break in short order. What to do??

Bought some 1" wide kevlar tape from fiber glastonbury inc. 30 ft roll, $27. Also found it at Jamestown boat supply for $16.

Attached to inside of tips along rivet line. Adhered with 3M77 to make it adhear to plastic. Rough up plastic with 80 grit to give it a tooth to hang on to. Then a plied 3 coats of cynoacrilate (super) glue. Bough in a 4 oz bottle for $16. Apply to kevlar by rubbing it in with a nitrile rubber glove on hand. Let it really soak in to kevlar. Wait 5 mi utes between coats. Then drill out for rivets.

After fully cured, tested on scrap plastic. No fatigue cracking! Really strengthens the tips, adds about .011 thickness to plastic.

Much improved and am satisfied now the tips won't cracking out. The 3M77 and super glue have excellent adhesion to plastic. Be sure and rougher up with 80 grit before applying kevlar tape.
At 9:50pm on February 28, 2018, Chris M. Brammer, Jr. said…

Hi Larry..... Thanks.  I’m using 2 Apple iPad Air 2’s WiFi to Levil Aviation 2AW.

At 7:47pm on November 15, 2017, Doug Johnson said…

    Glad to have another Zenith builder in the area. Mine is a slow moving project , not much time to spend on it.  

   

 
 
 

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service