Kostas Rossidis
  • Male
  • Moschato, Attiki
  • Greece
Share on Facebook

Kostas Rossidis's Friends

  • Martin Bima
  • Demetreus Pe
  • Edmondo Penazzi
  • vassilios gazikas
  • Heinz Genrich
  • Rentas Antonis
  • Alex Takis
  • George Alevizos
  • Zenair News
  • Bob Jones
  • Ken Pavlou
  • jeff fortune
  • Sebastien Heintz

Kostas Rossidis's Discussions

Zenair’s advisory directive #ZE-2008-01

Started this discussion. Last reply by Dan Robinson Sep 16, 2009. 7 Replies

 

Kostas Rossidis's Page

Latest Activity

Kostas Rossidis posted photos
Jun 13, 2022
A photo by Kostas Rossidis was featured
Feb 28, 2022
Kostas Rossidis posted photos
Feb 27, 2022
A photo by Kostas Rossidis was featured
Jan 3, 2022
A photo by Kostas Rossidis was featured

STOL CH 701 on Floats

STOL CH 701 on Floats in Greece
Dec 29, 2021
Kostas Rossidis posted photos
Dec 27, 2021

Profile Information

Aircraft Model
STOL CH 701
Project Status
Flying
Building From
Purchased finished aircraft
Engine installed (or plan to install)
Rotax 912
Your website (about your aircraft...)
http://https://www.facebook.com/kostas.rossidis
Building Experience
No Experience
Flying Experience
Commercial / CFI
Building and Flying Info / Your Profession / Other Background Info
Ryanair, Captain B737-800
Home Airport (ie. KMYJ)
LGMG

Kostas Rossidis's Photos

  • Add Photos
  • View All

Kostas Rossidis's Blog

Monoleaf main spring corrosion

Posted on February 8, 2009 at 1:54pm 0 Comments

After 4 years of operation in salt water the major problem that I encountered was corrosion of the Monoleaf main spring.I attribute this to the electrolysis phenomenon and due to the fact that the monoleaf main spring is of different aluminum alloy than the rest of the aiplane.Other than that the airplane is corrosion free. I welcome any suggestions for avoiding this in the future.



Before treatment for corrosion…



Continue

Comment Wall (9 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 9:21am on March 18, 2010, jeff fortune said…
Hi, congratulations on doing an 801 amphibian, I have both the 701 and 801 as amphibs on czech floats. The 801 is in the Bahamas except during hurricane season, the 701 in St. Petersburg, FL.

The 801 amphib needs every bit of extra hp you can add, spec the engine to the max. I started with a fuel injected superior (lycoming clone) xp360 with 7:1 compression with automotive gas acceptable but found that water takeoff, climb rate and ceiling were unacceptable. I added a turbocharger with manual waste gate that brings peak hp up and now takeoff from salt water is around 15 seconds.

Takeoff is 34 knots with full flaps, cruise is around 65 kts, max is around 75 kts. I descend at 55 kts and touchdown at about 40 with close to full flaps. Fuel consumption is 11-12 gph.

The floats you propose look like an excellent choice. Mine are czech 1900's but after a year of use I have added epoxy and foam flotation on the bottoms to bring them up to 2200 or more. Much better feeling floating higher in the water. Current weight is probably similar to clamar.

For pictures of my 801 go to: http://picasaweb.google.com/jeff.fortune/N63VKAZenithCH801AmphibiousAirplane?feat=directlink

If you want to see the 701, which is set up just like yours, you can navigate to these by clicking on "jeff's albums to the left of the 801 title.

That's a start, please send specific questions.
Jeff
At 4:53pm on October 13, 2009, Heinz Genrich said…
Hello again,Kostas!
Do you recommend the "Vortex Generators" for the 701?
Heinz Genrich
At 4:06pm on October 13, 2009, Heinz Genrich said…
Hello,Kostas!
I built my floats from plans.They are not quite finished yet.Are you using a "Soft Start Module" on your engine to retard the timing?I have the same engine but have not started it yet.The "Soft StartModule" is supposed to reduce "Kickback" on start up.
Heinz Genrich
At 3:31pm on October 13, 2009, Heinz Genrich said…
Hello,Kostas!
Thank you for getting back to me.I also spoke to Bob Jones and he said his angle of:Incidense" is set at 3/1 2 degrees.Could it be that you have a different engine than the 912S
Heinz Genrich
At 2:37pm on October 12, 2009, Heinz Genrich said…
Hello,Kostas!
What is that angle in degrees between your wing and the top of the floats?
Heinz Gerich
At 11:44am on September 8, 2009, Bob Jones said…
Great photos!!!
At 6:14pm on February 9, 2009, Ken Pavlou said…
File,

You are very close to where a lot of my family lives. We are originally from Poro and Galata, but I have family in Megara and Vlihada. I also have family on Salamina in Psili Ammo and Agios Giorgis between Xeno and Steno. I have been to the Perama many times to take the ferry boat over to Megara. It is a small world!

I am building a 601XL powered by a Corvair motor that I built. I am about 75% finished. Feel free to take a look at my pictures and video. There are not many pictures, but I'll be adding more soon. I hope to be done this year around fall.

Good luck

Ken
At 2:15pm on February 9, 2009, Ken Pavlou said…
Yassou Kosta. Thanks for posting pictures of your plane with beautiful Greece in the background. It is nice to see our country since I haven't visited in a long time.

Zito H Ellada!
Kanellos (Ken) Pavlou
At 5:08pm on February 2, 2009, Sebastien Heintz said…
Welcome Kostas!
 
 
 

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service