Dan Keys
  • Fernandina Beach, FL
  • United States
Share on Facebook

Dan Keys's Friends

  • Thomas Brannan
  • dewayne clardy
  • Roger E Barnes
  • Shayne McDaniel
  • joseph aloof

Dan Keys's Discussions

Extruded Aluminum Angle

Started this discussion. Last reply by Dan Hill May 18, 2019. 12 Replies

I'm replacing a few damaged parts and have discovered that the shipping costs for very little material from the factory is OUTRAGEOUS!  So, being a perfectly capable engineer and fabricator, I will…Continue

 

Dan Keys's Page

Latest Activity

Dan Keys posted a discussion

Extruded Aluminum Angle

I'm replacing a few damaged parts and have discovered that the shipping costs for very little material from the factory is OUTRAGEOUS!  So, being a perfectly capable engineer and fabricator, I will be drilling my own holes.  Does anyone know a source for 3/4" X 3/4" X 0.093" extruded 6061-T6 angle?  I don't usually mind paying a little extra for great work, but when the shipping exceeds the cost of the parts, it's time to look at alternatives.See More
May 14, 2019

Profile Information

Aircraft Model
ZODIAC XL
Project Status
Other
Building From
Partial kit
Engine installed (or plan to install)
Corvair
Building Experience
Have worked on airplanes before
Flying Experience
Private Pilot, Sport Pilot (or Ultralight)
Building and Flying Info / Your Profession / Other Background Info
I'm a semi-retired engineer / designer of very large and complex fabrication. 50 years as pilot with several thousand hours. 74 and NOT slowing down.
Home Airport (ie. KMYJ)
KFHB

Dan Keys's Photos

  • Add Photos
  • View All

Dan Keys's Blog

My New Project

Posted on July 7, 2018 at 9:27pm 9 Comments

This will be fun.  I picked up a 601XL built from 2005 to 2009. It was flown a little over 40 hours and signed off as airworthy.  But rather than going into service, it was parked, awaiting "B upgrade kit."  A qualified mechanic pulled the wings to start the upgrade and was stunned at what he found. The mounting holes in both the wing spars and center spar were terribly buggered and elongated.  Upon further examination, it was found that both wing spars were installed upside down, requiring…

Continue

Comment Wall (2 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 11:38am on March 27, 2019, Shayne McDaniel said…

Sorry I didn't get back to you sooner, Dan, but we were on vacation out of the country.  If you will give me a call in the evening I will tell you all about N809sp.  

land line:  417-223-4549

cell:  417-529-0411

Shayne

At 1:14am on July 9, 2018, dewayne clardy said…

yes I still have the wings and the b mod kit , Ill sell the entire plane and parts for 15,000 or best offer 2547231644

 
 
 

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service