Comment

Comment by Bob Simmons on April 25, 2021 at 1:49pm

Thanks, James. I have the pictures already printed out but I'm waiting for my hangar to be finished so I can unpack my kit parts and find my panel. I'm pretty sure the STOL panel is smaller than the Cruzer though, so I'm not 100% sure I can get what I want on it (2 radios, audio panel, switches, breakers, vents, plugs, etc.). Your panel is similar to what I want, so it should serve as a good reference point for me.

Comment by James K. Allen on April 24, 2021 at 7:52pm

Bob...I hope I am replying properly regarding your comment. The short answer is there is no problem integrating the 10 and 7 inch displays together. While I do have 2 separate  Dynon GPS  units feeding each display separately, you can feed both with a single Dynon GPS unit. The single unit would just "Y" connect into both units. Dynon has an overall interconnecting diagram on their website that shows how  the 2 HDX units  (any size combination) are integrated together. An ethernet cable ties the 2 units together. So updating one, will update the other. Hope this helps. Space wise, you should have enough space your panel to add the 2 units.  Dynon has lifesize HDX pictures you can download to see how all would fit on your panel.

Comment by Bob Simmons on April 24, 2021 at 6:30pm

Any difficulties integrating a 7" and 10" Dynon together? Every time I see stuff from them about integrating displays together, they're always the same size. I'm kinda hoping for a similar setup in my 750 STOL, but I'm pretty sure the Cruzer panel is bigger, so I may not have the room. Looks great though.