which side to mount 2.5 gallon header tank - Zenith Aircraft Builders and Flyers2024-03-28T11:44:05Zhttps://zenith.aero/forum/topics/which-side-to-mount-2-5-gallon-header-tank?feed=yes&xn_auth=noAccess is perfect. However n…tag:zenith.aero,2019-05-02:2606393:Comment:6755872019-05-02T02:06:45.698ZJan Eggenfellnerhttps://zenith.aero/profile/JanEggenfellner
<p>Access is perfect. However not always needed. This Video show the minimum amount of fittings that ever need access on the top of the tank. Also, the tank is easy to remove as seen here.</p>
<p></p>
<p><iframe width="560" height="315" src="https://www.youtube.com/embed/hVaPWYQ5R3U?wmode=opaque" frameborder="0" allowfullscreen=""></iframe>
</p>
<p>Access is perfect. However not always needed. This Video show the minimum amount of fittings that ever need access on the top of the tank. Also, the tank is easy to remove as seen here.</p>
<p></p>
<p><iframe width="560" height="315" src="https://www.youtube.com/embed/hVaPWYQ5R3U?wmode=opaque" frameborder="0" allowfullscreen=""></iframe>
</p> Thanks, perfect.
tag:zenith.aero,2019-04-24:2606393:Comment:6745842019-04-24T13:01:21.504ZAllan Gratiahttps://zenith.aero/profile/AllanGratia
<p>Thanks, perfect.</p>
<p></p>
<p>Thanks, perfect.</p>
<p></p> No, I found nothing needed ch…tag:zenith.aero,2019-04-24:2606393:Comment:6746642019-04-24T12:54:29.665ZTerrence "Dr. Terry" Hallhttps://zenith.aero/profile/TerrenceHall
<p>No, I found nothing needed changing, I just cut the fuse after I had the kit. Approximate size is in the picture. Go to mykitairplane.com from MIke now that Race retired. I think it was LAD?</p>
<p>No, I found nothing needed changing, I just cut the fuse after I had the kit. Approximate size is in the picture. Go to mykitairplane.com from MIke now that Race retired. I think it was LAD?</p> Thanks, Dr. Terry. I saw the…tag:zenith.aero,2019-04-24:2606393:Comment:6746602019-04-24T12:44:33.325ZAllan Gratiahttps://zenith.aero/profile/AllanGratia
<p>Thanks, Dr. Terry. I saw the pics on your page. What are the dimensions and would you do anything differently?</p>
<p>Thanks, Dr. Terry. I saw the pics on your page. What are the dimensions and would you do anything differently?</p> Allan:
Your reasons are the s…tag:zenith.aero,2019-04-24:2606393:Comment:6746562019-04-24T12:13:10.795ZTerrence "Dr. Terry" Hallhttps://zenith.aero/profile/TerrenceHall
<p>Allan:</p>
<p>Your reasons are the same rationale for my decision mounting header behind the passenger seat.</p>
<p>I have done that and the flap motor is not a problem.</p>
<p>Please note the benefit of access panel on passenger fuse that allows a 250 lb access to header.</p>
<p>The tribulations of working in that hell hole in the belly can not be underestimated.</p>
<p>I purchased an aftermarket kit from Wisconsin that was perfect.</p>
<p>Most of the pictures are on my Zenith page. Google…</p>
<p>Allan:</p>
<p>Your reasons are the same rationale for my decision mounting header behind the passenger seat.</p>
<p>I have done that and the flap motor is not a problem.</p>
<p>Please note the benefit of access panel on passenger fuse that allows a 250 lb access to header.</p>
<p>The tribulations of working in that hell hole in the belly can not be underestimated.</p>
<p>I purchased an aftermarket kit from Wisconsin that was perfect.</p>
<p>Most of the pictures are on my Zenith page. Google zenith or experimental access kits and it will show up. All of the hardware and instructions come with the "Race" kit. Some kid has taken over for Race.</p>
<p>Loren is a great source on Zenith construction for as long</p>
<p>as he doesn't get swallowed in the melting permafrost.</p>
<p>Greetings</p>
<p></p> Thanks..
tag:zenith.aero,2019-04-24:2606393:Comment:6743362019-04-24T11:46:27.309ZAllan Gratiahttps://zenith.aero/profile/AllanGratia
<p>Thanks..</p>
<p></p>
<p>Thanks..</p>
<p></p> Terrence Hall installed a hea…tag:zenith.aero,2019-04-24:2606393:Comment:6745812019-04-24T04:12:30.454ZLoren Warnerhttps://zenith.aero/profile/LorenWarner
<p>Terrence Hall installed a header tank access door on his 750 Cruise. I'll ask him to chime in.</p>
<p>Terrence Hall installed a header tank access door on his 750 Cruise. I'll ask him to chime in.</p> I also will create an access.…tag:zenith.aero,2019-04-23:2606393:Comment:6744362019-04-23T12:05:11.284ZAllan Gratiahttps://zenith.aero/profile/AllanGratia
<p>I also will create an access. Do you have a picture and dimensions, please?</p>
<p></p>
<p>I also will create an access. Do you have a picture and dimensions, please?</p>
<p></p> I made a pilot side access, f…tag:zenith.aero,2019-04-22:2606393:Comment:6745552019-04-22T22:54:52.329ZFred Westbrookhttps://zenith.aero/profile/FredWestbrook
<p>I made a pilot side access, for the header tank. Makes things so much easier to get to and inspect. </p>
<p>I made a pilot side access, for the header tank. Makes things so much easier to get to and inspect. </p> My son, not me.tag:zenith.aero,2019-04-22:2606393:Comment:6742922019-04-22T00:16:19.589ZLoren Warnerhttps://zenith.aero/profile/LorenWarner
<p>My son, not me.</p>
<p>My son, not me.</p>