TRIPLTEK 8" Pro Tablet - Zenith Aircraft Builders and Flyers2024-03-29T13:37:47Zhttps://zenith.aero/forum/topics/tripltek-8-pro-tablet?commentId=2606393%3AComment%3A850848&x=1&feed=yes&xn_auth=noThere are. Check out makerpla…tag:zenith.aero,2021-10-21:2606393:Comment:8508482021-10-21T12:45:04.486ZDouglas Binderhttps://zenith.aero/profile/DouglasBinder
<p>There are. Check out makerplane.org. They have a display for a Raspberry Pi that is bright enough for a cockpit.</p>
<p>There are. Check out makerplane.org. They have a display for a Raspberry Pi that is bright enough for a cockpit.</p> Correct. Missed that key ele…tag:zenith.aero,2021-10-20:2606393:Comment:8506592021-10-20T22:14:00.695ZR Michael Moorehttps://zenith.aero/profile/RMichaelMoore
<p>Correct. Missed that key element. I tried again for a few minutes to locate an 8" // Touch // 1200 nit panel.</p>
<p>Would be nice to know the source. But no luck.</p>
<p>Correct. Missed that key element. I tried again for a few minutes to locate an 8" // Touch // 1200 nit panel.</p>
<p>Would be nice to know the source. But no luck.</p> The datasheet for it;
http:/…tag:zenith.aero,2021-10-20:2606393:Comment:8504142021-10-20T17:16:35.748ZBob Simmonshttps://zenith.aero/profile/BobSimmons
<p>The datasheet for it;</p>
<p></p>
<p><a rel="nofollow noopener" href="http://52ebad10ee97eea25d5e-d7d40819259e7d3022d9ad53e3694148.r84.cf3.rackcdn.com/UK_Z05-MITSUBISHI_AA080MB01_TFT-LCD-Module_DS.pdf" target="_blank">http://52ebad10ee97eea25d5e-d7d40819259e7d3022d9ad53e3694148.r84.cf...<br/></a></p>
<p>But it doesn't appear to be a touch screen.</p>
<p>The datasheet for it;</p>
<p></p>
<p><a rel="nofollow noopener" href="http://52ebad10ee97eea25d5e-d7d40819259e7d3022d9ad53e3694148.r84.cf3.rackcdn.com/UK_Z05-MITSUBISHI_AA080MB01_TFT-LCD-Module_DS.pdf" target="_blank">http://52ebad10ee97eea25d5e-d7d40819259e7d3022d9ad53e3694148.r84.cf...<br/></a></p>
<p>But it doesn't appear to be a touch screen.</p> Should be at least 1000 nits.…tag:zenith.aero,2021-10-20:2606393:Comment:8506502021-10-20T14:01:34.586ZDouglas Binderhttps://zenith.aero/profile/DouglasBinder
<p>Should be at least 1000 nits. The display I showed you is being replaced by a turn coordinator and the EMS I made is being replaced with an MGL Blaze. </p>
<p>Should be at least 1000 nits. The display I showed you is being replaced by a turn coordinator and the EMS I made is being replaced with an MGL Blaze. </p> I'm using a Pixhawk controlle…tag:zenith.aero,2021-10-20:2606393:Comment:8504102021-10-20T13:48:43.348ZDouglas Binderhttps://zenith.aero/profile/DouglasBinder
<p>I'm using a Pixhawk controller for a drone. It sits right behind the display. The speed indicator is GPS or ground speed. I have a conventional ASI on the panel for air speed. As long as you have a GPS feeding the kalman filter in the Pixhawk, the gyros stay stable and the AI is accurate. Pity that it is too dim for the Kitfox it currently lives in. My CH601 will get a GRT Sport.</p>
<p>I'm using a Pixhawk controller for a drone. It sits right behind the display. The speed indicator is GPS or ground speed. I have a conventional ASI on the panel for air speed. As long as you have a GPS feeding the kalman filter in the Pixhawk, the gyros stay stable and the AI is accurate. Pity that it is too dim for the Kitfox it currently lives in. My CH601 will get a GRT Sport.</p> I may not have enough brightn…tag:zenith.aero,2021-10-20:2606393:Comment:8504982021-10-20T13:48:07.295ZArnie Minearhttps://zenith.aero/profile/ArnieMinear
<p>I may not have enough brightness either, the 5" is only 300 nits. I am not familiar with how bright is needed.</p>
<p></p>
<p>I may not have enough brightness either, the 5" is only 300 nits. I am not familiar with how bright is needed.</p>
<p></p> nice, what are you using to…tag:zenith.aero,2021-10-20:2606393:Comment:8506492021-10-20T13:43:00.937ZArnie Minearhttps://zenith.aero/profile/ArnieMinear
<p>nice, what are you using to populate the display?</p>
<p></p>
<p>nice, what are you using to populate the display?</p>
<p></p> This is what I made but it's…tag:zenith.aero,2021-10-20:2606393:Comment:8504092021-10-20T12:32:00.032ZDouglas Binderhttps://zenith.aero/profile/DouglasBinder
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/9718400455?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/9718400455?profile=RESIZE_710x" class="align-full"/>This is what I made but it's just too dim to see well in the sunlight.</a></p>
<p></p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/9718400455?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/9718400455?profile=RESIZE_710x" class="align-full"/>This is what I made but it's just too dim to see well in the sunlight.</a></p>
<p></p> this is a Nextion display, it…tag:zenith.aero,2021-10-20:2606393:Comment:8505902021-10-20T00:05:36.834ZArnie Minearhttps://zenith.aero/profile/ArnieMinear
<p>this is a Nextion display, it has a free software to develope the HMI. It is pretty easy, took about 1 afternoon to learn how to use it and build my first example. I have done some enhancement since then. They make a variety of sizes up to 7" I believe.</p>
<p></p>
<p>this is a Nextion display, it has a free software to develope the HMI. It is pretty easy, took about 1 afternoon to learn how to use it and build my first example. I have done some enhancement since then. They make a variety of sizes up to 7" I believe.</p>
<p></p> Arnie, may I ask what that di…tag:zenith.aero,2021-10-18:2606393:Comment:8503572021-10-18T12:41:15.101ZDouglas Binderhttps://zenith.aero/profile/DouglasBinder
<p>Arnie, may I ask what that display is? I have a nice EMS that I made for my Kitfox that I ended up scrapping because I couldn't find a bright enough display.</p>
<p>Arnie, may I ask what that display is? I have a nice EMS that I made for my Kitfox that I ended up scrapping because I couldn't find a bright enough display.</p>