Splice plates confusion - Zenith Aircraft Builders and Flyers2024-03-29T14:48:15Zhttps://zenith.aero/forum/topics/splice-plates-confusion?commentId=2606393%3AComment%3A795957&feed=yes&xn_auth=noIt was my feeling.
Thanks !tag:zenith.aero,2020-12-26:2606393:Comment:7962122020-12-26T22:57:31.722ZDaniel Pelletierhttps://zenith.aero/profile/DanielPelletier
<p>It was my feeling.</p>
<p></p>
<p>Thanks !</p>
<p>It was my feeling.</p>
<p></p>
<p>Thanks !</p> The preflight manual is for t…tag:zenith.aero,2020-12-26:2606393:Comment:7961152020-12-26T20:47:29.074ZChris Beebehttps://zenith.aero/profile/ChrisBeebe
<p>The preflight manual is for the xl so it's a completely different mounting setup. Use the info for the HD/HDS</p>
<p>The preflight manual is for the xl so it's a completely different mounting setup. Use the info for the HD/HDS</p> Very useful, but why the spec…tag:zenith.aero,2020-12-25:2606393:Comment:7957202020-12-25T20:53:17.372ZDaniel Pelletierhttps://zenith.aero/profile/DanielPelletier
<p>Very useful, but why the specifications are not the same between the splice plates update and the preflight procedure p. 46? And they figure 12 bolts on the preflight procedure but there is only 10 holes on the update 601 design with two sizes of bolts 3/8 and 5/16. Maybe the design on the 650 is quite different from the 601.<br/><br/></p>
<p>Daniel Pelletier</p>
<p>Very useful, but why the specifications are not the same between the splice plates update and the preflight procedure p. 46? And they figure 12 bolts on the preflight procedure but there is only 10 holes on the update 601 design with two sizes of bolts 3/8 and 5/16. Maybe the design on the 650 is quite different from the 601.<br/><br/></p>
<p>Daniel Pelletier</p> Here is a link to a Ktiplanes…tag:zenith.aero,2020-12-25:2606393:Comment:7959572020-12-25T18:23:53.719ZKen Ryanhttps://zenith.aero/profile/KenRyan
<p>Here is a link to a Ktiplanes article about bolts. It includes a comparison of NAS to AN.</p>
<p></p>
<p><a href="https://www.kitplanes.com/best-practices-nuts-and-bolts/" target="_blank" rel="noopener">https://www.kitplanes.com/best-practices-nuts-and-bolts/</a></p>
<p></p>
<p></p>
<p>Here is a link to a Ktiplanes article about bolts. It includes a comparison of NAS to AN.</p>
<p></p>
<p><a href="https://www.kitplanes.com/best-practices-nuts-and-bolts/" target="_blank" rel="noopener">https://www.kitplanes.com/best-practices-nuts-and-bolts/</a></p>
<p></p>
<p></p>