Online Community of Zenith Builders and Flyers
Bill is it possible to choose a particular angle of incidence when mounting the 801 wing? On my 701 it is not. Have you tried calling Zenith and talking to Roger?
No, I have not called anyone at Zac, but on the two previous kit planes I built (601 xl & RV-8a) it was important to set the wing incident so I assume the 801 I am building has a similar requirement ? Thanks, Bill
The 701 wing incidence is set for the builder through the fixed angle of the steel wing attach points welded to the steel tubular cabin frame at the factory, most likely in a jig. The builder ensures the angle of the rear wing spar is correct to the drawing when riveting the spar, that’s about it. Is the 801 similar?
Try looking at the CH750 wing attach manual http://www.zenithair.com/stolch750/data/75-ZA-4_75-ZA-5_A.pdf for how to do it and the angle should be on your plans. I am building the 750 and installed the wings a few months ago and it definitely mentions wing incidence for that model (3 deg. nose up I think). I'm at work and don't have the plans with me.