Rivet Dimples - Zenith Aircraft Builders and Flyers2024-03-28T11:57:47Zhttps://zenith.aero/forum/topics/rivet-dimples?feed=yes&xn_auth=noBy not holding the rivet pull…tag:zenith.aero,2009-06-15:2606393:Comment:248742009-06-15T02:48:22.389ZDon Herbelhttps://zenith.aero/profile/DonHerbel
By not holding the rivet pulling head square to the surface will cause the head to contact the sheet metal skin and cause the little dimple. With practice, I was able to reduce the problem of marking up the skin with the rivet puller head. Make sure the head has been properly modified to form the rounded rivet from the flush headed rivet provided with the kits by ZAC.
By not holding the rivet pulling head square to the surface will cause the head to contact the sheet metal skin and cause the little dimple. With practice, I was able to reduce the problem of marking up the skin with the rivet puller head. Make sure the head has been properly modified to form the rounded rivet from the flush headed rivet provided with the kits by ZAC.