Nord loc washers? - Zenith Aircraft Builders and Flyers2024-03-28T15:27:43Zhttps://zenith.aero/forum/topics/nord-loc-washers?xg_source=activity&feed=yes&xn_auth=noNo problem, I totally underst…tag:zenith.aero,2021-06-19:2606393:Comment:8399102021-06-19T23:30:23.328ZClint L Goschhttps://zenith.aero/profile/ClintLGosch
<p>No problem, I totally understand. I was apprehensive about using star washers until I talked with multiple A&P mechanics (who also inspected my plane prior to first flight), they assured me they would work fine. They were right! I've used them in all the standard locations, generator mounting, mag mounting, carb and airbox. At 2-3 cents per washer, I just toss them after one use. I recall nord locks are good for 10-12 uses, so I guess in reality they are not that much more…</p>
<p>No problem, I totally understand. I was apprehensive about using star washers until I talked with multiple A&P mechanics (who also inspected my plane prior to first flight), they assured me they would work fine. They were right! I've used them in all the standard locations, generator mounting, mag mounting, carb and airbox. At 2-3 cents per washer, I just toss them after one use. I recall nord locks are good for 10-12 uses, so I guess in reality they are not that much more expensive. If you are working on engine stuff you must be close to finishing! Good luck with the remainder of your project!</p> Thanks Clint, this is my firs…tag:zenith.aero,2021-06-18:2606393:Comment:8399782021-06-18T12:12:57.435ZJohn Fiskhttps://zenith.aero/profile/JohnFisk
<p>Thanks Clint, this is my first build and after seeing how most things are either safety wired or a locking nut i just wasn't sure about such a important part. thanks again</p>
<p></p>
<p>Thanks Clint, this is my first build and after seeing how most things are either safety wired or a locking nut i just wasn't sure about such a important part. thanks again</p>
<p></p> Hi John, I have not had any…tag:zenith.aero,2021-06-18:2606393:Comment:8392942021-06-18T02:14:07.662ZClint L Goschhttps://zenith.aero/profile/ClintLGosch
<p>Hi John, I have not had any issues with the standard star washers loosening on mine so far, I put a dab of inspection lacquer on each of mine and inspect whenever I have the cowl off. I have nord locks on my prop and matco brakes, they are a fantastic locking mechanism. I'd have no reservations using them on the carb. The only downside I see is the cost, but they lock incredibly well.</p>
<p>Hi John, I have not had any issues with the standard star washers loosening on mine so far, I put a dab of inspection lacquer on each of mine and inspect whenever I have the cowl off. I have nord locks on my prop and matco brakes, they are a fantastic locking mechanism. I'd have no reservations using them on the carb. The only downside I see is the cost, but they lock incredibly well.</p>