i have a continental o200 and am attaching Carb to the intake manifold and the intake has studs so the carb has regular nuts with it and some lock washers. would it be better to use the Nord Lock washer instead? dont want it to fall off. comments welcome

Views: 129

Reply to This

Replies to This Discussion

Hi John,  I have not had any issues with the standard star washers loosening on mine so far, I put a dab of inspection lacquer on each of mine and inspect whenever I have the cowl off.  I have nord locks on my prop and matco brakes, they are a fantastic locking mechanism.  I'd have no reservations using them on the carb. The only downside I see is the cost, but they lock incredibly well.

Thanks Clint, this is my first build and after seeing how most things are either safety wired or a locking nut i just wasn't sure about such a important part. thanks again

No problem, I totally understand.  I was apprehensive about using star washers until I talked with multiple A&P mechanics (who also inspected my plane prior to first flight), they assured me they would work fine.  They were right!  I've used them in all the standard locations, generator mounting, mag mounting, carb and airbox. At 2-3 cents per washer, I just toss them after one use.  I recall nord locks are good for 10-12 uses, so I guess in reality they are not that much more expensive.  If you are working on engine stuff you must be close to finishing!  Good luck with the remainder of your project!

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2021   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service