Recently I was taxiing to the run up and happened to notice that my oil pressure gauge (MGL EFIS) said 0 so I hightailed it back to the hangar and shut down. I've no idea how long it had said 0 which got me to wondering how long from oil pressure going away does it take for the parts to start hitting each other?

After a few minutes wait I turned my panel on again and the oil pressure was back up, and starting the engine was fine and I taxied around for a bit and everything seemed ok. I'm guessing the sender wire has an issue, but how do I know for sure?

Views: 196

Reply to This

Replies to This Discussion

You should be able to rig  mechanical gage in place of the sending unit for a check. Also I have a MGL EFIS and have programmed the EFIS alarm to alarm with low oil pressure. 

Bill

Hi Bill,

When the engine is off and you turn the panel on, does it show a value for oil pressure? Mine usually shows 1.4 but now sometimes it shows that, other times 0. And it’s always showing 0 when the engine is running now. 

paul.

Paul,

on mine it shows 0 and the Effis alarm light is on. As soon as the engine starts the oil pressure comes up and the alarm light goes off.  It’s hard for mr to believe the oil pump failed completely, sounds like a sending unit or bad wire connection.

Bill

Paul, when I dumped my oil inflight at cruise due to the oil filter backing off (UL Power 350iS) the engine gave me almost 100 seconds of turning before seizing! I had to run it to make a suitable forced landing area. 

Thanks for the replies. I was surprised I didn’t get an alarm for the oil pressure, need to revise my settings. Sounds like a real lack of pressure will result in unpleasant sounds pretty quickly, and I’m glad things worked out alright for you David.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2021   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service