Has anyone else experienced small amounts of oil leaking around the Hall/RPM sensors on the back of the engine block?

Views: 375

Reply to This

Replies to This Discussion

Thanks, I installed new (larger) O rings a couple of months a that fixed the problem...

Me too.  Got the new o rings from Wicks and put some red rtv around them and the area is now dry. 

O-ring update. After about 30 hours the larger size O-rings that I used (mentioned in an earlier message) started seeping again. Not badly, but zero leaks is nice. This time I used slightly larger 17mm X 2mm O-rings from the same kit. The sensors were a little harder to push in, but so far so good. If they leak again I will use RTV on them.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2021   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service