If you are using the above carb you will need a flange to attach the SCAT hose to the air intake.  A poster in the general discussion group came up with an inexpensive solution.  Part # 10350-10 at Aircraft Spruce can be used to fashion a flange plate by welding or riveting a flat piece of aluminum sheet to it.  

If anyone has a better solution I am open to it.  This is the last piece I need to complete my airplane.  Time is of the essence.


Views: 289

Reply to This

Replies to This Discussion

attached is a photo of one I made for my corvair, please note these are not the correct bolts, just temporary.


Good idea, great picture.  Did you weld this?

The flange is held in place with square aluminum flange, no welding involved. The same flanges were used to make the air filter heat box.



New from Zenith:

Zenith Planes For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits

Zenith Apparel from EAA:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:


West Coast USA:

Pro Builder Assistance:


Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2021   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service