Etch prime prior to assembly

Hi All

 I have just started my 650B project and I live on the coast,should I etch prime all parts prior to assembly?

Im a little concerned about how much weight it would add?

Any advice will be much appreciated

Cheers

Views: 264

▶ Reply to This

Replies to This Discussion

Permalink Reply by Larry Zepp on June 3, 2020 at 11:29am

Hi Greg,

I am getting closer to flying my 650B and have learned a few things about corrosion protection along the way.

  • Cortec water based primer (Sold by Zenith) has excellent corrosion protection. I used it on my tail, rudder and wings. Biggest complaint that caused me to switch to Etch primer is the cortec is a soft film.
  • The rattle can etch primer (Duplicolor or other in the auto store) provides a good etched bond to aluminum - its major function. But the etch primer is porous to the weather, so it needs a top coat to seal it.
  • If you have a paint booth handy, the ultimate is a two part epoxy primer that gets the bond to aluminum and is also a sealer. If the epoxy has Zinc Chromate, it has better corrosion resistance, but you need to keep the chromate (chromium) out of your lungs. Most paint manufactures have stopped using Zinc Chromate.
  • I used etch primer on many lap seams in the fuselage and wings as a bonding coat and intended this to be painted over with a two part epoxy. Then several paint system manufacturers said their epoxy would lift the etch primer, which is lacquer thinner based.
  • Most experienced builders say don't mix paint brands. I picked Super Flite brand polyurethane and was pleased to find their two part epoxy primer does not have any problem over dried etch primer or dried automotive engine enamel I used in the interior.
  • Glad I picked that brand. I have a three stage turbine sprayer and external air source (Polyurethane tries to kill you) and plan to paint the Zodiac in large pieces this Summer.
  • Best to get a weight estimate from your paint supplier.
  • With all of those Avex pull rivet stems being steel, I swore I was not going to test fly without paint. I have no interest in polishing - then birds would make me paranoid!

Best Regards, Larry Zepp N22LZ, Fort Wayne, IN

Permalink Reply by Greg O'Shannessy on June 5, 2020 at 4:56am

Hi Larry

Thanks for the info, will check out comparability before progressing.

Part of my question is should I prime the internal surfaces as well as prime and paint the external surfaces.

Thanks again for your help

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service