Dynon Skyview Data Gathering - Zenith Aircraft Builders and Flyers2024-03-29T06:16:34Zhttps://zenith.aero/forum/topics/dynon-skyview-data-gathering?commentId=2606393%3AComment%3A279522&feed=yes&xn_auth=noCongrats on your fly, and may…tag:zenith.aero,2013-04-23:2606393:Comment:2802342013-04-23T00:42:40.498Zcharles e rehbergerhttps://zenith.aero/profile/charleserehberger
Congrats on your fly, and may many flying adventures await you!
Congrats on your fly, and may many flying adventures await you! Thankstag:zenith.aero,2013-04-18:2606393:Comment:2797622013-04-18T04:42:49.181ZTerry Hagelhttps://zenith.aero/profile/TerryHagel
<p>Thanks</p>
<p>Thanks</p> Thankstag:zenith.aero,2013-04-18:2606393:Comment:2799522013-04-18T04:42:29.218ZTerry Hagelhttps://zenith.aero/profile/TerryHagel
<p>Thanks</p>
<p>Thanks</p> Congrats on the first flight!…tag:zenith.aero,2013-04-17:2606393:Comment:2793382013-04-17T16:25:53.328ZMack P. Kreizenbeckhttps://zenith.aero/profile/MackPKreizenbeck
<p>Congrats on the first flight!</p>
<p>After reading your report, I wish that the Skyview was available when I built my bird!</p>
<p>Blue skys ahead,</p>
<p>Mack</p>
<p>Congrats on the first flight!</p>
<p>After reading your report, I wish that the Skyview was available when I built my bird!</p>
<p>Blue skys ahead,</p>
<p>Mack</p> Congrats, Terry. I finished…tag:zenith.aero,2013-04-17:2606393:Comment:2793282013-04-17T00:58:43.420ZDon Herbelhttps://zenith.aero/profile/DonHerbel
<p>Congrats, Terry. I finished my 701's phase 1 last November. I have 55 hours so far. Looking forward to the 2013 flying season. Enjoy!</p>
<p>Congrats, Terry. I finished my 701's phase 1 last November. I have 55 hours so far. Looking forward to the 2013 flying season. Enjoy!</p> Thanks for your comment on my…tag:zenith.aero,2013-04-16:2606393:Comment:2795222013-04-16T22:53:39.504ZTerry Hagelhttps://zenith.aero/profile/TerryHagel
<p>Thanks for your comment on my panel. </p>
<p> </p>
<p>I see you are working on your panel. That is quite a job and took longer than I thought it would. One thing I was pleased with is the sub-panel for switches. When I take that loose and the Dynon loose, I can reach anything behind the panel so I will never have a problem getting to items behind the panel at a later time. You may want to consider something of a similar nature. You can cut those big holes in the panel supplied with the…</p>
<p>Thanks for your comment on my panel. </p>
<p> </p>
<p>I see you are working on your panel. That is quite a job and took longer than I thought it would. One thing I was pleased with is the sub-panel for switches. When I take that loose and the Dynon loose, I can reach anything behind the panel so I will never have a problem getting to items behind the panel at a later time. You may want to consider something of a similar nature. You can cut those big holes in the panel supplied with the kit and install the factory panel in the plane. Smaller holes or angles to stiffen things up are easy to add when there is not a problem getting behind the panel.</p>
<p> </p>
<p>Terry</p> Gorgeous panel, clean and sim…tag:zenith.aero,2013-04-16:2606393:Comment:2794782013-04-16T04:09:29.198ZPaul Sandershttps://zenith.aero/profile/ukpylot
Gorgeous panel, clean and simple. Congrats.
Gorgeous panel, clean and simple. Congrats.